Using cloud vGPUs: Difference between revisions

From Alliance Doc
Jump to navigation Jump to search
No edit summary
(Marked this version for translation)
 
(123 intermediate revisions by 9 users not shown)
Line 1: Line 1:
{{Draft}}
<languages />
<languages />
<translate>
<translate>
<!--T:2-->
This guide describes how to allocate vGPU resources to a virtual machine (VM), installing the necessary drivers and checking whether the vGPU can be used.


== Supported flavors == <!--T:23-->
<!--T:84-->
This page describes how to
* allocate virtual GPU (vGPU) resources to a virtual machine (VM),
* install the necessary drivers and
* check whether the vGPU can be used.
Access to repositories as well as to the vGPUs is currently only available within [https://arbutus.cloud.computecanada.ca Arbutus Cloud]. Please note that the documentation below only covers the vGPU driver installation. The [https://developer.nvidia.com/cuda-toolkit-archive CUDA toolkit] is not pre-installed but you can install it directly from  NVIDIA or load it from [[Accessing_CVMFS|the CVMFS software stack]].
If you choose to install the toolkit directly from NVIDIA, please ensure that the vGPU driver is not overwritten with the one from the CUDA package.
 
== Supported flavors == <!--T:85-->


<!--T:3-->
<!--T:3-->
To use a GPU within a VM, the instance needs to be deployed on one of the flavors listed below. The GPU will be available to the operating system via the PCI bus.
To use a vGPU within a VM, the instance needs to be deployed on one of the flavors listed below. The vGPU will be available to the operating system via the PCI bus.


<!--T:4-->
<!--T:4-->
* vgpu1-c18-56gb
* g1-8gb-c4-22gb
* g1-16gb-c8-40gb
 
== Preparation of a VM running AlmaLinux 9 == <!--T:86-->
 
<!--T:87-->
Once the VM is available, make sure to update the OS to the latest available software, including the kernel.
Then, reboot the VM to have the latest kernel running.
 
<!--T:88-->
To have access to the [https://en.wikipedia.org/wiki/Dynamic_Kernel_Module_Support DKMS package], the [https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm EPEL repository] is required.
 
<!--T:89-->
AlmaLinux 9 has by default a faulty <code>nouveau</code> driver which crashes the kernel as soon as the <code>nvidia</code> driver is mounted.
The VM needs a few extra steps to prevent the loading of the nouveau driver when the system boots.
 
</translate>
<pre>
[root@almalinux9]# echo -e "blacklist nouveau\noptions nouveau modeset=0" >/etc/modprobe.d/blacklist-nouveau.conf
[root@almalinux9]# dracut -fv --omit-drivers nouveau
[root@almalinux9]# dnf -y update && dnf -y install epel-release && reboot
</pre>
<translate>
 
<!--T:90-->
After the reboot of the VM, the Arbutus vGPU Cloud repository needs to be installed.
 
</translate>
<pre>
[root@almalinux9]# dnf install http://repo.arbutus.cloud.computecanada.ca/pulp/repos/alma9/Packages/a/arbutus-cloud-vgpu-repo-1.0-1.el9.noarch.rpm</pre>
<translate>
 
<!--T:91-->
The next step is to install the vGPU packages, which will install the required driver and user-space tools.
 
</translate>
<pre>
[root@almalinux9]# dnf -y install nvidia-vgpu-gridd.x86_64 nvidia-vgpu-tools.x86_64 nvidia-vgpu-kmod.x86_64
</pre>
<translate>
 
<!--T:92-->
After a successful  installation, <code>nvidia-smi</code> can be used to verify the proper functionality.
 
</translate>
<pre>
[root@almalinux9]# nvidia-smi
Tue Apr 23 16:37:31 2024     
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4    |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf          Pwr:Usage/Cap |          Memory-Usage | GPU-Util  Compute M. |
|                                        |                        |              MIG M. |
|=========================================+========================+======================|
|  0  GRID V100D-8C                  On  |  00000000:00:06.0 Off |                    0 |
| N/A  N/A    P0            N/A /  N/A  |      0MiB /  8192MiB |      0%      Default |
|                                        |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                       
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU  GI  CI        PID  Type  Process name                              GPU Memory |
|        ID  ID                                                              Usage      |
|=========================================================================================|
|  No running processes found                                                            |
+-----------------------------------------------------------------------------------------+
</pre>
<translate>
 
== Preparation of a VM running AlmaLinux 8 == <!--T:93-->
 
<!--T:94-->
Once the VM is available, make sure to update the OS to the latest available software, including the kernel. Then, reboot the VM to have the latest kernel running.
To have access to the [https://en.wikipedia.org/wiki/Dynamic_Kernel_Module_Support DKMS package], the EPEL repository is required.
 
</translate>
<pre>
[root@vgpu almalinux]# dnf -y update && dnf -y install epel-release && reboot
</pre>
<translate>
 
<!--T:95-->
After the reboot of the VM, the Arbutus vGPU Cloud repository needs to be installed.
 
</translate>
<pre>
[root@almalinux8]# dnf install http://repo.arbutus.cloud.computecanada.ca/pulp/repos/alma8/Packages/a/arbutus-cloud-vgpu-repo-1.0-1.el8.noarch.rpm
</pre>
<translate>
 
<!--T:96-->
The next step is to install the vGPU packages, which will install the required driver and user-space tools.
</translate>
<pre>
[root@vgpu almalinux]# dnf -y install nvidia-vgpu-gridd.x86_64 nvidia-vgpu-tools.x86_64 nvidia-vgpu-kmod.x86_64
</pre>
<translate>
 
<!--T:97-->
After a successful  installation, <code>nvidia-smi</code> can be used to verify the proper functionality.
 
</translate>
<pre>
[root@almalinux8]# nvidia-smi
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4    |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf          Pwr:Usage/Cap |          Memory-Usage | GPU-Util  Compute M. |
|                                        |                        |              MIG M. |
|=========================================+========================+======================|
|  0  GRID V100D-8C                  On  |  00000000:00:06.0 Off |                    0 |
| N/A  N/A    P0            N/A /  N/A  |      0MiB /  8192MiB |      0%      Default |
|                                        |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                       
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU  GI  CI        PID  Type  Process name                              GPU Memory |
|        ID  ID                                                              Usage      |
|=========================================================================================|
|  No running processes found                                                            |
+-----------------------------------------------------------------------------------------+
</pre>
<translate>
 
== Preparation of a VM running Debian 11 == <!--T:98-->
Ensure that the latest packages are installed and the system has been booted with the latest stable kernel, as <b>DKMS</b> will request the latest one available from the Debian repositories.
 
</translate>
<pre>
root@debian11:~# apt-get update && apt-get -y dist-upgrade && reboot
</pre>
<translate>


== Preparation of a VM running CentOS7 == <!--T:5-->
<!--T:99-->
After a successful reboot, the system should have the latest available kernel running and the repository can be installed, by installing the <code>arbutus-cloud-repo</code> package.
This package also contains the gpg key all packages are signed with.


Once the VM is available, make sure to update the OS to the latest available software, including the kernel and reboot the VM to have the latest kernel running.
</translate>
<pre>
<pre>
[root@test centos]# yum -y update && reboot
root@debian11:~# wget http://repo.arbutus.cloud.computecanada.ca/pulp/deb/deb11/pool/main/arbutus-cloud-repo_0.1_all.deb
root@debian11:~# apt-get install -y ./arbutus-cloud-repo_0.1_all.deb
</pre>
</pre>
<translate>


Since the  proprietary nvidia drivers need to be compiled against the running kernel, the package '''dkms''' is required from the [https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm EPEL Repository]
<!--T:100-->
Update the local apt cache and install the vGPU packages:


</translate>
<pre>
<pre>
[root@test centos]# yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
root@debian11:~# apt-get update && apt-get -y install nvidia-vgpu-kmod nvidia-vgpu-tools nvidia-vgpu-gridd
</pre>
</pre>


Install the '''Arbutus Cloud''' repository definition, it also installs the public key the package are signed with to ensure their authenticity, since these drivers and
userspace tools are carefully tested first against the infrastructure, before they are made available.
<pre>
<pre>
[root@test centos]# yum -y install http://repo.arbutus.cloud.computecanada.ca/pulp/repos/centos/7/x86_64/Packages/a/arbutus-cloud-vgpu-repo-1.0-1.el7.noarch.rpm
root@debian11:~# nvidia-smi
Tue Apr 23 18:55:18 2024     
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4    |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf          Pwr:Usage/Cap |          Memory-Usage | GPU-Util  Compute M. |
|                                        |                        |              MIG M. |
|=========================================+========================+======================|
|  0  GRID V100D-8C                  On  |  00000000:00:06.0 Off |                    0 |
| N/A  N/A    P0            N/A / N/A  |      0MiB /   8192MiB |      0%      Default |
|                                        |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                       
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU  GI  CI        PID  Type  Process name                              GPU Memory |
|        ID  ID                                                              Usage      |
|=========================================================================================|
|  No running processes found                                                            |
+-----------------------------------------------------------------------------------------+
</pre>
</pre>
<translate>
== Preparation of a VM running Debian 12 ==  <!--T:101-->
Ensure that the latest packages are installed and the system has been booted with the latest stable kernel, as <b>DKMS</b> will request the latest one available from the Debian repositories.


The last step is to install the '''nvidia vGPU packages'''. The kernel module package 'nvidia-vgpu-kmod', will take a few minutes as it compiles the required kernel modules in the background.
</translate>
<pre>
<pre>
yum -y install nvidia-vgpu-kmod nvidia-vgpu-gridd nvidia-vgpu-tools
root@debian12:~# apt-get update && apt-get -y dist-upgrade && reboot
</pre>
<translate>
 
<!--T:102-->
After a successful reboot, the system should have the latest available kernel running and the repository can be installed, by installing the <code>arbutus-cloud-repo</code> package.
This package also contains the gpg key all packages are signed with.
 
</translate>
<pre>
root@debian12:~# wget http://repo.arbutus.cloud.computecanada.ca/pulp/deb/deb12/pool/main/arbutus-cloud-repo_0.1+deb12_all.deb
root@debian12:~# apt-get install -y ./arbutus-cloud-repo_0.1+deb12_all.deb
</pre>
</pre>
<translate>


After the successful installation, the vGPU is a now accessible and licensed.
<!--T:103-->
Update the local apt cache and install the vGPU packages:
 
</translate>
<pre>
<pre>
[root@test centos]# nvidia-smi       
root@debian12:~# apt-get update && apt-get -y install nvidia-vgpu-kmod nvidia-vgpu-tools nvidia-vgpu-gridd
Mon Jun  1 16:03:27 2020     
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 440.56      Driver Version: 440.56      CUDA Version: 10.2    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|        Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|  0  GRID V100D-8C      On  | 00000000:00:05.0 Off |                    0 |
| N/A  N/A    P0    N/A /  N/A |    560MiB /  8192MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
                                                                 
+-----------------------------------------------------------------------------+
| Processes:                                                      GPU Memory |
|  GPU      PID  Type  Process name                            Usage      |
|=============================================================================|
|  No running processes found                                                |
+-----------------------------------------------------------------------------+
</pre>
</pre>


== Preparation of a VM running CentOS8 == <!--T:6-->
<pre>
root@debian12:~# nvidia-smi
Tue Apr 23 18:55:18 2024     
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4    |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf          Pwr:Usage/Cap |          Memory-Usage | GPU-Util  Compute M. |
|                                        |                        |              MIG M. |
|=========================================+========================+======================|
|  0  GRID V100D-8C                  On  |  00000000:00:06.0 Off |                    0 |
| N/A  N/A    P0            N/A /  N/A  |      0MiB /  8192MiB |      0%      Default |
|                                        |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                       
+-----------------------------------------------------------------------------------------+
| Processes:                                                                             |
|  GPU  GI  CI        PID  Type  Process name                              GPU Memory |
|        ID  ID                                                              Usage      |
|=========================================================================================|
|  No running processes found                                                            |
+-----------------------------------------------------------------------------------------+
</pre>
<translate>


== Preparation of a VM running Debian10 == <!--T:7-->
== Preparation of a VM running Ubuntu 22 == <!--T:104-->
Ensure that the OS is up to date, that all the latest patches are installed, and that the latest stable kernel is running.


== Preparation of a VM running Ubuntu20 == <!--T:8-->
</translate>
<pre>
root@ubuntu22:~# apt-get update && apt-get -y dist-upgrade && reboot
</pre>
<translate>


<!--T:105-->
After a successful reboot, the system should have the latest available kernel running.
Now the repository can be installed by installing the <code>arbutus-cloud-repo</code> package.
This package also contains the gpg key all packages are signed with.


</translate>
<pre>
root@ubuntu22:~# wget http://repo.arbutus.cloud.computecanada.ca/pulp/deb/ubnt22/pool/main/arbutus-cloud-repo_0.1_all.deb
root@ubuntu22:~# apt-get install ./arbutus-cloud-repo_0.1_all.deb
</pre>
<translate>


<!--T:106-->
Update the local apt cache and install the vGPU packages:
</translate>
</translate>
<pre>
root@ubuntu22:~# apt-get update && apt-get -y install nvidia-vgpu-kmod nvidia-vgpu-tools nvidia-vgpu-gridd
</pre>
<translate>
<!--T:107-->
If your installation was successful, the vGPU will be accessible and licensed.
</translate>
<pre>
root@ubuntu22:~# nvidia-smi
Wed Apr 24 14:37:52 2024     
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4    |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf          Pwr:Usage/Cap |          Memory-Usage | GPU-Util  Compute M. |
|                                        |                        |              MIG M. |
|=========================================+========================+======================|
|  0  GRID V100D-8C                  On  |  00000000:00:06.0 Off |                    0 |
| N/A  N/A    P0            N/A /  N/A  |      0MiB /  8192MiB |      0%      Default |
|                                        |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                       
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU  GI  CI        PID  Type  Process name                              GPU Memory |
|        ID  ID                                                              Usage      |
|=========================================================================================|
|  No running processes found                                                            |
+-----------------------------------------------------------------------------------------+
</pre>
<translate>
== Preparation of a VM running Ubuntu 20 == <!--T:108-->
Ensure that the OS is up to date, that all the latest patches are installed, and that the latest stable kernel is running.
</translate>
<pre>
root@ubuntu20:~# apt-get update && apt-get -y dist-upgrade && reboot
</pre>
<translate>
<!--T:109-->
After a successful reboot, the system should have the latest available kernel running.
Now the repository can be installed by installing the <code>arbutus-cloud-repo</code> package.
This package also contains the gpg key all packages are signed with.
</translate>
<pre>
root@ubuntu20:~# wget http://repo.arbutus.cloud.computecanada.ca/pulp/deb/ubnt20/pool/main/arbutus-cloud-repo_0.1ubuntu20_all.deb
root@ubuntu20:~# apt-get install ./arbutus-cloud-repo_0.1ubuntu20_all.deb
</pre>
<translate>
<!--T:110-->
Update the local apt cache and install the vGPU packages:
</translate>
<pre>
root@ubuntu20:~# apt-get update && apt-get -y install nvidia-vgpu-kmod nvidia-vgpu-tools nvidia-vgpu-gridd
</pre>
<translate>
<!--T:111-->
If your installation was successful, the vGPU will be accessible and licensed.
</translate>
<pre>
root@ubuntu20:~# nvidia-smi
Wed Apr 24 14:37:52 2024     
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4    |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf          Pwr:Usage/Cap |          Memory-Usage | GPU-Util  Compute M. |
|                                        |                        |              MIG M. |
|=========================================+========================+======================|
|  0  GRID V100D-8C                  On  |  00000000:00:06.0 Off |                    0 |
| N/A  N/A    P0            N/A /  N/A  |      0MiB /  8192MiB |      0%      Default |
|                                        |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                       
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU  GI  CI        PID  Type  Process name                              GPU Memory |
|        ID  ID                                                              Usage      |
|=========================================================================================|
|  No running processes found                                                            |
+-----------------------------------------------------------------------------------------+
</pre>
[[Category:Cloud]]

Latest revision as of 18:42, 29 October 2024

Other languages:

This page describes how to

  • allocate virtual GPU (vGPU) resources to a virtual machine (VM),
  • install the necessary drivers and
  • check whether the vGPU can be used.

Access to repositories as well as to the vGPUs is currently only available within Arbutus Cloud. Please note that the documentation below only covers the vGPU driver installation. The CUDA toolkit is not pre-installed but you can install it directly from NVIDIA or load it from the CVMFS software stack. If you choose to install the toolkit directly from NVIDIA, please ensure that the vGPU driver is not overwritten with the one from the CUDA package.

Supported flavors

To use a vGPU within a VM, the instance needs to be deployed on one of the flavors listed below. The vGPU will be available to the operating system via the PCI bus.

  • g1-8gb-c4-22gb
  • g1-16gb-c8-40gb

Preparation of a VM running AlmaLinux 9

Once the VM is available, make sure to update the OS to the latest available software, including the kernel. Then, reboot the VM to have the latest kernel running.

To have access to the DKMS package, the EPEL repository is required.

AlmaLinux 9 has by default a faulty nouveau driver which crashes the kernel as soon as the nvidia driver is mounted. The VM needs a few extra steps to prevent the loading of the nouveau driver when the system boots. 

[root@almalinux9]# echo -e "blacklist nouveau\noptions nouveau modeset=0" >/etc/modprobe.d/blacklist-nouveau.conf
[root@almalinux9]# dracut -fv --omit-drivers nouveau
[root@almalinux9]# dnf -y update && dnf -y install epel-release && reboot

After the reboot of the VM, the Arbutus vGPU Cloud repository needs to be installed. 

[root@almalinux9]# dnf install http://repo.arbutus.cloud.computecanada.ca/pulp/repos/alma9/Packages/a/arbutus-cloud-vgpu-repo-1.0-1.el9.noarch.rpm

The next step is to install the vGPU packages, which will install the required driver and user-space tools. 

[root@almalinux9]# dnf -y install nvidia-vgpu-gridd.x86_64 nvidia-vgpu-tools.x86_64 nvidia-vgpu-kmod.x86_64

After a successful installation, nvidia-smi can be used to verify the proper functionality. 

[root@almalinux9]# nvidia-smi 
Tue Apr 23 16:37:31 2024       
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4     |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                 Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp   Perf          Pwr:Usage/Cap |           Memory-Usage | GPU-Util  Compute M. |
|                                         |                        |               MIG M. |
|=========================================+========================+======================|
|   0  GRID V100D-8C                  On  |   00000000:00:06.0 Off |                    0 |
| N/A   N/A    P0             N/A /  N/A  |       0MiB /   8192MiB |      0%      Default |
|                                         |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                         
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU   GI   CI        PID   Type   Process name                              GPU Memory |
|        ID   ID                                                               Usage      |
|=========================================================================================|
|  No running processes found                                                             |
+-----------------------------------------------------------------------------------------+

Preparation of a VM running AlmaLinux 8

Once the VM is available, make sure to update the OS to the latest available software, including the kernel. Then, reboot the VM to have the latest kernel running. To have access to the DKMS package, the EPEL repository is required. 

[root@vgpu almalinux]# dnf -y update && dnf -y install epel-release && reboot

After the reboot of the VM, the Arbutus vGPU Cloud repository needs to be installed. 

[root@almalinux8]# dnf install http://repo.arbutus.cloud.computecanada.ca/pulp/repos/alma8/Packages/a/arbutus-cloud-vgpu-repo-1.0-1.el8.noarch.rpm

The next step is to install the vGPU packages, which will install the required driver and user-space tools. 

[root@vgpu almalinux]# dnf -y install nvidia-vgpu-gridd.x86_64 nvidia-vgpu-tools.x86_64 nvidia-vgpu-kmod.x86_64

After a successful installation, nvidia-smi can be used to verify the proper functionality. 

[root@almalinux8]# nvidia-smi 
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4     |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                 Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp   Perf          Pwr:Usage/Cap |           Memory-Usage | GPU-Util  Compute M. |
|                                         |                        |               MIG M. |
|=========================================+========================+======================|
|   0  GRID V100D-8C                  On  |   00000000:00:06.0 Off |                    0 |
| N/A   N/A    P0             N/A /  N/A  |       0MiB /   8192MiB |      0%      Default |
|                                         |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                         
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU   GI   CI        PID   Type   Process name                              GPU Memory |
|        ID   ID                                                               Usage      |
|=========================================================================================|
|  No running processes found                                                             |
+-----------------------------------------------------------------------------------------+

Preparation of a VM running Debian 11

Ensure that the latest packages are installed and the system has been booted with the latest stable kernel, as DKMS will request the latest one available from the Debian repositories. 

root@debian11:~# apt-get update && apt-get -y dist-upgrade && reboot

After a successful reboot, the system should have the latest available kernel running and the repository can be installed, by installing the arbutus-cloud-repo package. This package also contains the gpg key all packages are signed with. 

root@debian11:~# wget http://repo.arbutus.cloud.computecanada.ca/pulp/deb/deb11/pool/main/arbutus-cloud-repo_0.1_all.deb
root@debian11:~# apt-get install -y ./arbutus-cloud-repo_0.1_all.deb

Update the local apt cache and install the vGPU packages: 

root@debian11:~# apt-get update && apt-get -y install nvidia-vgpu-kmod nvidia-vgpu-tools nvidia-vgpu-gridd

root@debian11:~# nvidia-smi
Tue Apr 23 18:55:18 2024       
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4     |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                 Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp   Perf          Pwr:Usage/Cap |           Memory-Usage | GPU-Util  Compute M. |
|                                         |                        |               MIG M. |
|=========================================+========================+======================|
|   0  GRID V100D-8C                  On  |   00000000:00:06.0 Off |                    0 |
| N/A   N/A    P0             N/A /  N/A  |       0MiB /   8192MiB |      0%      Default |
|                                         |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                         
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU   GI   CI        PID   Type   Process name                              GPU Memory |
|        ID   ID                                                               Usage      |
|=========================================================================================|
|  No running processes found                                                             |
+-----------------------------------------------------------------------------------------+

Preparation of a VM running Debian 12

Ensure that the latest packages are installed and the system has been booted with the latest stable kernel, as DKMS will request the latest one available from the Debian repositories. 

root@debian12:~# apt-get update && apt-get -y dist-upgrade && reboot

After a successful reboot, the system should have the latest available kernel running and the repository can be installed, by installing the arbutus-cloud-repo package. This package also contains the gpg key all packages are signed with. 

root@debian12:~# wget http://repo.arbutus.cloud.computecanada.ca/pulp/deb/deb12/pool/main/arbutus-cloud-repo_0.1+deb12_all.deb
root@debian12:~# apt-get install -y ./arbutus-cloud-repo_0.1+deb12_all.deb

Update the local apt cache and install the vGPU packages: 

root@debian12:~# apt-get update && apt-get -y install nvidia-vgpu-kmod nvidia-vgpu-tools nvidia-vgpu-gridd

root@debian12:~# nvidia-smi
Tue Apr 23 18:55:18 2024       
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4     |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                 Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp   Perf          Pwr:Usage/Cap |           Memory-Usage | GPU-Util  Compute M. |
|                                         |                        |               MIG M. |
|=========================================+========================+======================|
|   0  GRID V100D-8C                  On  |   00000000:00:06.0 Off |                    0 |
| N/A   N/A    P0             N/A /  N/A  |       0MiB /   8192MiB |      0%      Default |
|                                         |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                         
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU   GI   CI        PID   Type   Process name                              GPU Memory |
|        ID   ID                                                               Usage      |
|=========================================================================================|
|  No running processes found                                                             |
+-----------------------------------------------------------------------------------------+

Preparation of a VM running Ubuntu 22

Ensure that the OS is up to date, that all the latest patches are installed, and that the latest stable kernel is running. 

root@ubuntu22:~# apt-get update && apt-get -y dist-upgrade && reboot

After a successful reboot, the system should have the latest available kernel running. Now the repository can be installed by installing the arbutus-cloud-repo package. This package also contains the gpg key all packages are signed with. 

root@ubuntu22:~# wget http://repo.arbutus.cloud.computecanada.ca/pulp/deb/ubnt22/pool/main/arbutus-cloud-repo_0.1_all.deb
root@ubuntu22:~# apt-get install ./arbutus-cloud-repo_0.1_all.deb

Update the local apt cache and install the vGPU packages: 

root@ubuntu22:~# apt-get update && apt-get -y install nvidia-vgpu-kmod nvidia-vgpu-tools nvidia-vgpu-gridd

If your installation was successful, the vGPU will be accessible and licensed. 

root@ubuntu22:~# nvidia-smi 
Wed Apr 24 14:37:52 2024       
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4     |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                 Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp   Perf          Pwr:Usage/Cap |           Memory-Usage | GPU-Util  Compute M. |
|                                         |                        |               MIG M. |
|=========================================+========================+======================|
|   0  GRID V100D-8C                  On  |   00000000:00:06.0 Off |                    0 |
| N/A   N/A    P0             N/A /  N/A  |       0MiB /   8192MiB |      0%      Default |
|                                         |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                         
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU   GI   CI        PID   Type   Process name                              GPU Memory |
|        ID   ID                                                               Usage      |
|=========================================================================================|
|  No running processes found                                                             |
+-----------------------------------------------------------------------------------------+

Preparation of a VM running Ubuntu 20

Ensure that the OS is up to date, that all the latest patches are installed, and that the latest stable kernel is running. 

root@ubuntu20:~# apt-get update && apt-get -y dist-upgrade && reboot

After a successful reboot, the system should have the latest available kernel running. Now the repository can be installed by installing the arbutus-cloud-repo package. This package also contains the gpg key all packages are signed with. 

root@ubuntu20:~# wget http://repo.arbutus.cloud.computecanada.ca/pulp/deb/ubnt20/pool/main/arbutus-cloud-repo_0.1ubuntu20_all.deb
root@ubuntu20:~# apt-get install ./arbutus-cloud-repo_0.1ubuntu20_all.deb

Update the local apt cache and install the vGPU packages: 

root@ubuntu20:~# apt-get update && apt-get -y install nvidia-vgpu-kmod nvidia-vgpu-tools nvidia-vgpu-gridd

If your installation was successful, the vGPU will be accessible and licensed. 

root@ubuntu20:~# nvidia-smi 
Wed Apr 24 14:37:52 2024       
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.54.15              Driver Version: 550.54.15      CUDA Version: 12.4     |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                 Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp   Perf          Pwr:Usage/Cap |           Memory-Usage | GPU-Util  Compute M. |
|                                         |                        |               MIG M. |
|=========================================+========================+======================|
|   0  GRID V100D-8C                  On  |   00000000:00:06.0 Off |                    0 |
| N/A   N/A    P0             N/A /  N/A  |       0MiB /   8192MiB |      0%      Default |
|                                         |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                         
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU   GI   CI        PID   Type   Process name                              GPU Memory |
|        ID   ID                                                               Usage      |
|=========================================================================================|
|  No running processes found                                                             |
+-----------------------------------------------------------------------------------------+
Retrieved from "https://docs.alliancecan.ca/mediawiki/index.php?title=Using_cloud_vGPUs&oldid=163588"