Automation in the context of multifactor authentication/en

Automated workflows which connect to the clusters without human intervention cannot make use of a second authentication factor. In order to execute such workflows after MFA becomes a requirement, you must request access to one of our special nodes. These nodes will not require the use of a second factor, but will be otherwise much more limited than regular login nodes in terms of the type of authentication they accept and the type of action that they can be used to perform.

Increased security measures

Available only by request

Users who need to make use of automated workflows for their research must first contact our technical support to be allowed to use these nodes. When contacting us, please explain in detail the type of automation you intend to use as part of your workflow. Tell us what commands will be executed and what tools or libraries you will be using to manage the automation.

Available only through constrained SSH keys

The only accepted means of authentication for the automation nodes will be through SSH keys uploaded to the CCDB. SSH keys written in your .ssh/authorized_keys file are not accepted. In addition, the SSH keys must obey the following constraints.

restrict

This constraint disables port forwarding, agent forwarding, and X11 forwarding. It also disables the pseudo teletype (PTY), blocking most interactive workloads. This is required because these automation nodes are not intended to be used to start long-running or interactive processes. Regular login nodes must be used instead.

from="pattern-list"

This constraint specifies that the key can only be used from IP addresses that match the patterns. This is to ensure that this key is not used from computers other than the ones intended. The patterns list must include only IP addresses that fully specify at least the network class, the network, and the subnet, which are the first three elements of an IP address, for example, x.y.*.* would not be accepted, but x.y.z.* would be accepted. Note that the IP address should be a public IP address, thus anything like 10.0.0.0 – 10.255.255.255, 172.16.0.0 – 172.31.255.255 and 192.168.0.0 – 192.168.255.255 would be incorrect. You can use a site like What Is My IP Address? or the shell command curl ifconfig.me to learn your public IP address.

command="COMMAND"

This constraint forces the command COMMAND to be executed when the connection is established. This is so that you may restrict which commands can be used with this key.

Convenience wrapper scripts to use for command=

command constraints can specify any command, but they are most useful when using a wrapper script which will accept or reject commands based on which command is being called. You can write your own script, but for convenience, we provide a number of such scripts which allow common actions. These scripts are defined in this git repository.

• /cvmfs/soft.computecanada.ca/custom/bin/computecanada/allowed_commands/transfer_commands.sh allows only file transfers, such as scp, sftp or rsync.
• /cvmfs/soft.computecanada.ca/custom/bin/computecanada/allowed_commands/archiving_commands.sh allows commands to archive files, such as gzip, tar or dar.
• /cvmfs/soft.computecanada.ca/custom/bin/computecanada/allowed_commands/file_commands.sh allows commands to manipulate files, such as mv, cp or rm.
• /cvmfs/soft.computecanada.ca/custom/bin/computecanada/allowed_commands/git_commands.sh allows the git command.
• /cvmfs/soft.computecanada.ca/custom/bin/computecanada/allowed_commands/slurm_commands.sh allows some Slurm commands, such as squeue, sbatch.
• /cvmfs/soft.computecanada.ca/custom/bin/computecanada/allowed_commands/allowed_commands.sh allows all of the above.

Examples of accepted SSH keys

Accepted SSH keys must include all 3 of the above constraints to be accepted. Here are examples of SSH keys that would be accepted: For example, the following key would be accepted, and could only be used for transferring files (through scp, sftp or rsync for example):

restrict,from="216.18.209.*",command="/cvmfs/soft.computecanada.ca/custom/bin/computecanada/allowed_commands/transfer_commands.sh" ssh-ed25519 AAAAC3NzaC1lZDI1NTE6AACAIExK9iTTDGsyqKKzduA46DvIJ9oFKZ/WN5memqG9Invw

while this one would only allow Slurm commands (squeue, scancel, sbatch, scontrol, sq):

restrict,from="216.18.209.*",command="/cvmfs/soft.computecanada.ca/custom/bin/computecanada/allowed_commands/slurm_commands.sh" ssh-ed25519 AAAAC3NzaC1lZDI1NTE6AACAIExK9iTTDGsyqKKzduA46DvIJ9oFKZ/WN5memqG9Invw

Warning

The constraints must be added directly as text in front of your key, before uploading the complete string in your account.

Automation nodes for each cluster

Here is the hostname of the node to be used for unattended connections on each cluster:

• Cedar: robot.cedar.alliancecan.ca
• Graham: robot.graham.alliancecan.ca
• Béluga: robot.beluga.alliancecan.ca
• Narval: robot.narval.alliancecan.ca
• Niagara: robot.niagara.alliancecan.ca

Using the right key

If you have multiple keys on your computer, you need to be careful to use the correct key. This is typically done by passing parameters to the command you are using. Below are a few examples.

With ssh or scp:

[name@server ~]$ ssh -i .ssh/private_key_to_use ...

[name@server ~]$ scp -i .ssh/private_key_to_use ...

With rsync:

[name@server ~]$ rsync -e "ssh -i .ssh/private_key_to_use" ...

It's often much more convenient to put these parameters into your ~/.ssh/config file, so they get picked up by any ssh client invocation. For instance:

host robot
 hostname robot.cluster.alliancecan.ca
 user myrobot
 identityfile ~/.ssh/my-robot-key
 identitiesonly yes
 requesttty no

this means that the following kinds of commands will do what you want:

[name@server ~]$ ssh robot /usr/bin/ls

[name@server ~]$ rsync -a datadir/a robot:scratch/testdata

Automation using Python and Paramiko

If you are using the Paramiko Python module to automate your workflow, this is how you can make it work with the robot nodes:

# ====================================================================================================
#! /usr/bin/env python3
# ====================================================================================================
import os
import paramiko
# ====================================================================================================

key = paramiko.Ed25519Key.from_private_key_file("/home/username/.ssh/cc_allowed")

user = "username"
host = "robot.graham.alliancecan.ca"

ssh = paramiko.SSHClient()

# If the host is not known, it is OK.
ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())

ssh.connect(hostname=host, username=user, pkey=key)

cmd = "ls -l"
stdin, stdout, stderr = ssh.exec_command(cmd)

print("".join(stdout.readlines()))

ssh.close()
# ====================================================================================================

This code connects to the robot node on Graham using an automation key specified in CCDB and executes the ls -l command to get the list of files. Then prints the list to the screen.

Note, that it is important to install paramiko with the

$ pip install paramiko[all]

command. This will make sure that the support for the Ed25519 key type will also be installed.

Compute Canada Data Base