Translations:Multifactor authentication/8/en: Difference between revisions

From Alliance Doc
Jump to navigation Jump to search
(Importing a new version from external source)
(Importing a new version from external source)
Line 6: Line 6:
# Select <i>Use serial</i>, then generate a private ID and a secret key. <b>Securely save a copy of the data in the Public ID, Private ID, and Secret Key fields before you click on <i>Finish</i>, as you will need the data for the next step.</b>
# Select <i>Use serial</i>, then generate a private ID and a secret key. <b>Securely save a copy of the data in the Public ID, Private ID, and Secret Key fields before you click on <i>Finish</i>, as you will need the data for the next step.</b>
# <b>IMPORTANT: Make sure you clicked on "Finish" in the previous step.</b>
# <b>IMPORTANT: Make sure you clicked on "Finish" in the previous step.</b>
# Log into the CCDB to register your YubiKey in the <i>[https://ccdb.computecanada.ca/multi_factor_authentications Multifactor authentication management page]</i>.
# Log into the CCDB to register your YubiKey in the <i>[https://ccdb.alliancecan.ca/multi_factor_authentications Multifactor authentication management page]</i>.
<gallery widths=300px heights=300px>
<gallery widths=300px heights=300px>
File:Yubico Manager OTP.png|Step 3
File:Yubico Manager OTP.png|Step 3

Revision as of 18:42, 24 April 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Multifactor authentication)
# Download and install the YubiKey Manager software from the [https://www.yubico.com/support/download/yubikey-manager/ Yubico website].
# Insert your YubiKey and launch the YubiKey Manager software.
# In the YubiKey Manager software, select <i>Applications</i>, then <i>OTP</i>.  (Images below illustrate this and the next few steps.)
# Select <i>Configure</i> for either slot 1 or slot 2. Slot 1 corresponds to a short touch (pressing for 1 to 2.5 seconds), while slot 2 is a long touch on the key (pressing for 3 to 5 seconds). Slot 1 is typically pre-registered for Yubico cloud mode. If you are already using this slot for other services, either use slot 2, or click on <i>Swap</i> to transfer the configuration to slot 2 before configuring slot 1. 
# Select <i>Yubico OTP</i>.
# Select <i>Use serial</i>, then generate a private ID and a secret key. <b>Securely save a copy of the data in the Public ID, Private ID, and Secret Key fields before you click on <i>Finish</i>, as you will need the data for the next step.</b>
# <b>IMPORTANT: Make sure you clicked on "Finish" in the previous step.</b>
# Log into the CCDB to register your YubiKey in the <i>[https://ccdb.alliancecan.ca/multi_factor_authentications Multifactor authentication management page]</i>.
<gallery widths=300px heights=300px>
File:Yubico Manager OTP.png|Step 3
File:Yubico Manager OTP configuration.png|Step 4
File:Select Yubico OTP.png|Step 5
File:Generate Yubikey IDs.png|Step 6, Step 7
CCDB Yubikeys.png|Step 8
</gallery>
  1. Download and install the YubiKey Manager software from the Yubico website.
  2. Insert your YubiKey and launch the YubiKey Manager software.
  3. In the YubiKey Manager software, select Applications, then OTP. (Images below illustrate this and the next few steps.)
  4. Select Configure for either slot 1 or slot 2. Slot 1 corresponds to a short touch (pressing for 1s to 2.5), while slot 2 is a long touch on the key (pressing for 3s to 5s). Slot 1 is typically pre-registered for Yubico cloud mode. If you are already using this slot for other services, either use slot 2, or click on Swap to transfer the configuration to slot 2 before configuring slot 1.
  5. Select Yubico OTP.
  6. Select Use serial, then generate a private ID and a secret key. Securely save a copy of the data in the Public ID, Private ID, and Secret Key fields before you click on Finish, as you will need the data for the next step.
  7. IMPORTANT: Make sure you clicked on "Finish" in the previous step.
  8. Log into the CCDB to register your YubiKey in the Multifactor authentication management page.
  • Step 3

    Step 3

  • Step 4

    Step 4

  • Step 5

    Step 5

  • Step 6, Step 7

    Step 6, Step 7

  • Step 8

    Step 8

Compute Canada Data Base

Retrieved from "https://docs.alliancecan.ca/mediawiki/index.php?title=Translations:Multifactor_authentication/8/en&oldid=134680"