LS-DYNA

Introduction

LS-DYNA is available on all Compute Canada systems. It is used for many applications to solve problems in multi-physics, solid mechanics, heat transfer and fluid dynamics either as separate phenomena or as coupled physic such as thermal stress or fluid structure interaction. LSTC was recently purchased by ANSYS therefore the software maay eventually be provided as part of the ansys module. For now we recommended using the the ls-dyna module as documented in the below wiki page.

Licensing

Compute Canada is a hosting provider for LS-DYNA. This means that we have LS-DYNA software installed on our clusters, but we do not provide a generic license accessible to everyone. However, many institutions, faculties, and departments already have local licenses that can be used on our clusters. Researchers can also purchase a license directly from the company to run on a Sharcet license server for dedicated use on any Compute Canada system.

Once a license is setup, there will be remaining technical aspects. The license server on your end will need to be reachable by our compute nodes. This will require our technical team to get in touch with the technical people managing your license software. In some cases, this has already been done. You should then be able to load a ls-dyna Compute Canada modules, and it should find your license automatically. For assistance please contact our Technical support.

Configuring your license file

Our module for LS-DYNA is designed to look for license information in a few places. One of those places is your home folder. If you have your own license server, you can write the information to access it in the following format:

File : ls-dyna.lic

#LICENSE_TYPE: network
#LICENSE_SERVER:<port>@<server>

and put this file in the folder $HOME/.licenses/ on each cluster where you plan to submit ls-dyna jobs. Note that firewall changes will need to be done on both our side and your side. To arrange this, send an email containing the service port and ip address of your floating license server to Technical support. To check your new license file is responding run the following commands:

module load ls-dyna
ls-dyna_s

The output should contain defined (non-empty) values for Licensed to: and Issued by:, press ^c to exit.

Cluster Batch Job Submission

LS-DYNA provides software for running jobs on a single node with SMP (Shared Memory Parallel) binaries and multiple nodes with MPP (Message Passing Parallel) binaries where parallelization is achieved using OpenMP and MPI respectively. Please note, before ls-dyna/12.0 or ls-dyna-mpi/12.0 can be loaded the StdEnv/2020 module must be loaded.

SMP Slurm Script

Modules for running jobs on a single node can be listed with: module spider ls-dyna. Jobs maybe submitted to the queue with: sbatch script-smp.sh. The following is a sample submission script suitable for running LS-DYNA efficiently with upto 8 cores on a single cluster compute node:

File : script-smp.sh

#!/bin/bash
#SBATCH --account=def-account  # Specify
#SBATCH --time=0-03:00         # D-HH:MM
#SBATCH --cpus-per-task=8      # Number of cores
#SBATCH --mem=16G              # Memory per node

module load StdEnv/2016.4      # Versions =< 11.1
module load ls-dyna/11.1

# module load StdEnv/2020      # Versions >= 12.0
# module load ls-dyna/12.0

ls-dyna_s ncpu=$SLURM_CPUS_ON_NODE i=airbag.deploy.k

where 
ls-dyna_s = single precision smp solver
ls-dyna_d = double precision smp solver

MPP Slurm Script

Modules for running jobs on multiple nodes can be listed with: module spider ls-dyna-mpi. Jobs maybe submitted to the queue with: sbatch script-mpp.sh. The following is a sample slurm script suitable for running LS-DYNA jobs with 8 or more cores across multiple cluster compute nodes. The number of nodes is determined automatically by the schedular and therefore does not need to be specified:

File : script-mpp.sh

#!/bin/bash
#SBATCH --account=def-account  # Specify
#SBATCH --time=0-03:00         # D-HH:MM
#SBATCH --ntasks=8             # Number of cores
#SBATCH --mem-per-cpu=2G       # Memory per core

# module load StdEnv/2016.4    # Versions =< 11.1
# module load ls-dyna-mpi/11.1

module load StdEnv/2020        # Versions >= 12.0
module load ls-dyna-mpi/12.0

srun ls-dyna_d i=airbag.deploy.k

where 
ls-dyna_s = single precision mpp solver
ls-dyna_d = double precision mpp solver

Depending on the complexity of the simulation, LS-DYNA may not be able to efficiently use very many cores efficiently. Therefore before running a simulation to completion, test the scaling properties of the simulation by gradually increasing the number of cores to determine the optimal value before simulation slowdown occurs. To determine the Job Wall-clock time, CPU Efficiency and Memory Efficiency for a successfully completed job use the seff jobnumber command.

Remote visualization

LSTC provides LS-PrePost for pre and post processing of LS-DYNA models. This program is made available by a separate module. It does not require a license and can be used on any cluster node or the graham VDI nodes by following these steps:

Cluster Nodes

Connect to a compute or login node with TigerVNC
module load ls-prepost
lsprepost

VDI Nodes

Connect to gra-vdi with TigerVNC
module load CcEnv StdEnv
module load ls-prepost
lsprepost

Message Passing Interface