Alliance Doc

MATLAB

Revision as of 14:36, 30 September 2020 by Stubbsda (talk | contribs)
Other languages:

There are two ways of using MATLAB on Compute Canada clusters.

Running MATLAB directly

This approach requires you to have access to a MATLAB license. You may either:

  • Run MATLAB on Cedar or Béluga, both of which have a license available for any student, professor or academic researcher.
  • Use an external license, i.e. one owned by your institution, faculty, department, or lab. See Using an external license below.
Running a compiled MATLAB application

This method requires compiling your code into a binary using the MATLAB Compiler (mcc). You can then run that binary executable using the appropriate MATLAB Runtime. More details about these approaches are provided below.

Using an external license

Compute Canada is a hosting provider for MATLAB. This means that we have MATLAB installed on our clusters and can allow you to access an external license to run computations on our infrastructure. Arrangements have already been made with several Canadian institutions to make this automatic. To see if you already have access to a license, carry out the following test: 

[name@cluster ~]$ module load matlab/2018a
[name@cluster ~]$ matlab -nodisplay -nojvm -r "fprintf('%s\n', license()); exit"
                                                < M A T L A B (R) >
                                      Copyright 1984-2018 The MathWorks, Inc.
                                       R2018a (9.4.0.813654) 64-bit (glnxa64)
                                                 February 23, 2018

987654
[name@cluster ~]$

If any license number is printed, you're okay. Be sure to run this test on each cluster on which you want to use MATLAB; you may get different results.

If you get the message This version is newer than the version of the license.dat file and/or network license manager on the server machine, try an older version of MATLAB in the module load line.

Otherwise, either your institution does not have a MATLAB license, does not allow its use in this way, or no arrangements have yet been made. Find out who administers the MATLAB license at your institution (faculty, department) and contact them or your Mathworks account manager to know if you are allowed to use the license in this way.

If you are allowed, then some technical configuration will be required. Create a file similar to the following example:

File : matlab.lic

# MATLAB license passcode file
SERVER <ip address> ANY <port>
USE_SERVER


Put this file in the $HOME/.licenses/ directory where the IP address and port number correspond to the values for your campus license server. Next you will need to ensure that the license server on your campus is reachable by our compute nodes. This will require our technical team to get in touch with the technical people managing your license software. Please write to technical support so that we can arrange this for you.

For online documentation, see http://www.mathworks.com/support. For product information, visit http://www.mathworks.com.

Preparing your .matlab folder

Because the /home directory is accessible in read-only mode on some clusters' compute nodes, users should create a .matlab symbolic link that makes sure that the MATLAB profile and job data will be written to the /scratch space instead. 

[name@cluster ~]$ cd $HOME
[name@cluster ~]$ if [ -d ".matlab" ]; then
  mv .matlab scratch/
else
  mkdir -p scratch/.matlab
fi && ln -sn scratch/.matlab .matlab

Available Toolboxes

To see a list of the MATLAB toolboxes available with the license and cluster you're using, you can use the following command: 

[name@cluster ~]$  module load matlab
[name@cluster ~]$  matlab -nodisplay -nojvm -r "fprintf('%s\n', license()); ver; exit"

Running a MATLAB code

Important: Any MATLAB calculation larger than a short test job of about 5 minutes must be submitted to the scheduler. For instructions on using the scheduler, please see the Running jobs page.

Consider the following example code:


File : cosplot.m

function cosplot()
% MATLAB file example to approximate a sawtooth
% with a truncated Fourier expansion.
nterms=5;
fourbypi=4.0/pi;
np=100;
y(1:np)=pi/2.0;
x(1:np)=linspace(-2.0*pi,2*pi,np);

for k=1:nterms
 twokm=2*k-1;
 y=y-fourbypi*cos(twokm*x)/twokm^2;
end

plot(x,y)
print -dpsc matlab_test_plot.ps
quit
end


Here is a simple Slurm script that you can use to run cosplot.m:


File : matlab_slurm.sl

#!/bin/bash -l
#SBATCH --job-name=matlab_test
#SBATCH --account=def-someprof # adjust this to match the accounting group you are using to submit jobs
#SBATCH --time=0-03:00         # adjust this to match the walltime of your job
#SBATCH --nodes=1      
#SBATCH --ntasks=1
#SBATCH --cpus-per-task=1      # adjust this if you are using parallel commands
#SBATCH --mem=4000             # adjust this according to the memory requirement per node you need
#SBATCH --mail-user=you@youruniversity.ca # adjust this to match your email address
#SBATCH --mail-type=ALL

# Choose a version of MATLAB by loading a module:
module load matlab/2018a
# Remove -singleCompThread below if you are using parallel commands:
matlab -nodisplay -singleCompThread -r "cosplot"


Submit the job using sbatch:

  
[name@server ~]$ sbatch matlab_slurm.sl

Do not use the -singleCompThread option if you request more than one core with --cpus-per-task. You should also ensure that the size of your MATLAB parpool matches the number of cores you are requesting.

Each time you run MATLAB, it will create a file like java.log.12345 unless you supply the -nojvm option. However, using -nojvm may interfere with certain plotting functions. For further information on command line options -nodisplay, -singleCompThread, -nojvm, and -r, see MATLAB (Linux) on the MathWorks website.

Running multiple parallel MATLAB jobs simultaneously

There is a known issue when two (or more) parallel MATLAB jobs are initializing their parpool simultaneously: multiple new MATLAB instances are trying to read and write to the same .dat file in the $HOME/.matlab/local_cluster_jobs/R* folder, which corrupts the local parallel profile used by other MATLAB jobs. To fix the corrupted profile, delete the local_cluster_jobs folder when no job is running.

There are two main definitive solutions:

  1. Making sure only one MATLAB job at a time will start its parpool. There are many possible technical solutions, but none is perfect:
    • using a lock file (which may remain locked if a previous job has failed),
    • using random delays (which may be equal or almost equal, and still cause the corruption),
    • using always increasing delays (which are wasting compute time),
    • using Slurm options --begin or --dependency=after:JOBID to control the start time (which increases wait time in the queue).
  2. Making sure each MATLAB job creates a local parallel profile in a unique location of the filesystem.

In your MATLAB code:

File : parallel_main.m

% Create a "local" cluster object
local_cluster = parcluster('local')

% Modify the JobStorageLocation to $SLURM_TMPDIR
local_cluster.JobStorageLocation = getenv('SLURM_TMPDIR')

% Start the parallel pool
parpool(local_cluster);


References:

Using the Compiler and Runtime libraries

Important: Like any other intensive job, you must always run MCR code within a job that you will have submitted to the scheduler. For instructions on using the scheduler, please see the Running jobs page.

You can also compile your code using MATLAB Compiler, which is included among the modules hosted by Compute Canada. See documentation for the compiler on the MathWorks website. At the moment, mcc is provided for versions 2014a, 2018a and later.

To compile the cosplot.m example given above, you would use the command

  
[name@yourserver ~]$ mcc -m -R -nodisplay cosplot.m

This will produce a binary named cosplot, as well as a wrapper script. To run the binary on Compute Canada servers, you will only require the binary. The wrapper script named run_cosplot.sh will not work as is on our servers because MATLAB assumes that some libraries can be found in specific locations. Instead, we provide a different wrapper script called run_mcr_binary.sh which sets the correct paths.

On one of our servers, load an MCR module corresponding to the MATLAB version you used to build the executable:

  
[name@server ~]$ module load mcr/R2018a

Run the following command:

  
[name@server ~]$ setrpaths.sh --path cosplot

then, in your submission script (not on the login nodes), use your binary as so: run_mcr_binary.sh cosplot

You will only need to run the setrpaths.sh command once for each compiled binary. The run_mcr_binary.sh will instruct you to run it if it detects that it has not been done.

Using the MATLAB Parallel Server

MATLAB Distributed Computing Server (MDCS) became MATLAB Parallel Server in the recent years. This technology is only worthwhile if you need more workers in your parallel MATLAB job than available CPU cores on a single compute node. While the regular MATLAB installation (see above sections) allows you to run parallel jobs within one node (up to 64 workers per job, depending on which node and cluster), the MATLAB Parallel Server is the licensed MathWorks solution for running a parallel job on more than one node. For the moment, the use of the MATLAB Parallel Server is only supported on the Béluga cluster.

This solution allows the submission of MATLAB parallel jobs from a local MATLAB interface on your computer. Some configuration is required in order to submit jobs remotely to the Slurm scheduler. Please follow instructions in the sections below.

Slurm plugin for MATLAB

  1. Have MATLAB R2020a installed on your computer, including the Parallel Computing Toolbox.
  2. Go to the MathWorks Slurm Plugin page, download and run the *.mlpkginstall file. (i.e. click on the blue Download button on the right side, just above the Overview tab.)
  3. Enter your MathWorks credentials; if the configuration wizard does not start, run in MATLAB
    parallel.cluster.generic.runProfileWizard()
  4. Give these responses to the configuration wizard:
    • Select Unix (which is usually the only choice)
    • Shared location: No
    • Cluster host: beluga.computecanada.ca
    • Username (optional): Enter your Compute Canada username (the identity file can be set later, if needed)
    • Remote job storage: /scratch (or a unique sub-directory, for example /scratch/tmp_matlab)
    • Maximum number of workers: 960
    • Matlab installation: /cvmfs/restricted.computecanada.ca/easybuild/software/2017/Core/matlab/2020a
    • License type: Network license manager
    • Profile Name: beluga
  5. Click on Create and Finish to finalize the profile.

Edit the plugin once installed

In MATLAB, go to the nonshared folder (i.e. run the following in the MATLAB terminal): 

cd(fullfile(matlabshared.supportpkg.getSupportPackageRoot, 'parallel', 'slurm', 'nonshared'))

Then:

  1. Open the independentSubmitFcn.m file; around line #97 is the line

    additionalSubmitArgs = sprintf('--ntasks=1 --cpus-per-task=%d', cluster.NumThreads);

    Replace this line with

    additionalSubmitArgs = ccSBATCH().getSubmitArgs();

  2. Open the communicatingSubmitFcn.m file; around line #103 is the line

    additionalSubmitArgs = sprintf('--ntasks=%d --cpus-per-task=%d', environmentProperties.NumberOfTasks, cluster.NumThreads);

    Replace this line with

    additionalSubmitArgs = ccSBATCH().getSubmitArgs();

Restart MATLAB and go back to your home directory: 

cd(getenv('HOME'))

Validation

Do not use the built-in validation tool in the Cluster Profile Manager. Instead, you should try the TestParfor example, along with a proper ccSBATCH.m script file:

  1. Download and extract code samples on GitHub at https://github.com/ComputeCanada/matlab-parallel-server-samples.
  2. In MATLAB, go to the newly extracted TestParfor directory.
  3. Follow instructions in https://github.com/ComputeCanada/matlab-parallel-server-samples/blob/master/README.md.

Note: When the ccSBATCH.m is in your current working directory, you may try the Cluster Profile Manager validation tool, but only the first two tests will work. Other tests are not yet supported.

Retrieved from "https://docs.alliancecan.ca/mediawiki/index.php?title=MATLAB&oldid=90298"