Narval

Availability: since October, 2021

Login node: narval.alliancecan.ca

Globus Collection: Compute Canada - Narval

Data transfer node (rsync, scp, sftp,...): narval.alliancecan.ca

Narval is a general purpose cluster designed for a variety of workloads; it is located at the École de technologie supérieure in Montreal. The cluster is named in honour of the narwhal, a species of whale which has occasionally been observed in the Gulf of St. Lawrence.

Site-specific policies

By policy, Narval's compute nodes cannot access the internet. If you need an exception to this rule, contact technical support with information about the IP address, port number(s) and protocol(s) needed as well as the duration and a contact person.

Crontab is not offered on Narval.

Each job on Narval should have a duration of at least one hour (five minutes for test jobs) and you cannot have more than 1000 jobs, running or queued, at any given moment. The maximum duration for a job on Narval is 7 days (168 hours).

Storage

HOME Lustre filesystem, 40 TB of space	Location of home directories, each of which has a small fixed quota. You should use the project space for larger storage needs. Small per user quota. There is a daily backup of the home directories.
SCRATCH Lustre filesystem, 5.5 PB of space	Large space for storing temporary files during computations. No backup system in place. Large quota per user. There is an automated purge of older files in this space.
PROJECT Lustre filesystem, 19 PB of space	This space is designed for sharing data among the members of a research group and for storing large amounts of data. Large and adjustable per group quotas. There is a daily backup of the project space.

For transferring data via Globus, you should use the endpoint specified at the top of this page, while for tools like rsync and scp you can use a login node.

High-performance interconnect

The InfiniBand Mellanox HDR network links together all of the nodes of the cluster. Each hub of 40 HDR ports (200 Gb/s) can connect up to 66 nodes with HDR100 (100 Gb/s) with 33 HDR links divided in two (2) by special cables. The seven (7) remaining HDR links allow the hub to be connected to a rack containing the seven (7) central HDR InfiniBand hubs. The islands of nodes are therefore connected by a maximum blocking factor of 33:7 (4.7:1). In contrast, the storage servers are connected by a much lower blocking factor in order to maximize the performance.

In practice the Narval racks contain islands of 48 or 56 regular CPU nodes. It is therefore possible to run parallel jobs using up to 3584 cores with a non-blocking network. For larger jobs or ones which are distributed in a fragmented manner across the network, the blocking factor is 4.7:1. The inter-connect remains a high-performance one nonetheless.

Node characteristics

nodes	cores	available memory	CPU	storage	GPU
1145	64	249G or 255000M	2 x AMD Rome 7532 @ 2.40 GHz 256M cache L3	1 x 960G SSD	-
33		2009G or 2057500M
3		4000G or 4096000M	2 x AMD Rome 7502 @ 2.50 GHz 128M cache L3
159	48	498G or 510000M	2 x AMD Milan 7413 @ 2.65 GHz 128M cache L3	1 x SSD of 3.84 TB	4 x NVidia A100SXM4 (40 GB memory), connected via NVLink

AMD processors

Supported instructions sets

Narval is equipped with 2nd and 3rd generation AMD EPYC processors which support the AVX2 instruction set. This instruction set is also supported by all CPUs at Béluga, Cedar, Graham and Niagara.

However, all nodes at Béluga and Niagara and some nodes at Cedar and Graham also support AVX512 instructions, which are not supported at Narval.

Nodes containing Intel Broadwell CPUs support AVX2 but not AVX512. Nodes containing Intel Skylake or Cascade Lake CPUs support both AVX2 and AVX512.

Consequently, an application compiled on Broadwell nodes at Cedar and Graham, including their login nodes, will run at Narval. An application compiled at Béluga or Niagara, or on a Skylake or Cascade Lake node at Cedar or Graham, will not run at Narval. Such an application must be recompiled (see Intel compilers below)

Intel compilers

Intel compilers can compile applications for Narval's AMD processors with AVX2 and earlier instruction sets. Use the -march=core-avx2 option to produce executables which are compatible with both Intel and AMD processors.

However, if you have compiled a program on a system which uses Intel processors and you have used one or more options like -xXXXX, such as -xCORE-AVX2, the compiled program will not work on Narval because the Intel compilers add additional instructions in order to verify that processor used is an Intel product. On Narval, the options -xHOST and -march=native are equivalent to -march=pentium (the old 1993 Pentium) and should not be used.

Software environments

StdEnv/2020 is the standard software environment on Narval; previous versions have been blocked intentionally. If you need an application only available with an older standard environment, please write to Technical support.

BLAS and LAPACK libraries

The Intel MKL library works with AMD processors, although not in an optimal way. We now favour the use of the FlexiBLAS library. For more details, please consult the page on BLAS and LAPACK.

Globus is a file transfer service

Intel Math Kernel Library, a software library of optimized math routines