CUDA tutorial

Introduction

This tutorial introduces the Graphics Processing Unit (GPU) as a massively parallel computing device, the CUDA parallel programming language, and some of the CUDA numerical libraries for use in high performance computing.

Prerequisites for this tutorial

This tutorial uses CUDA to accelerate C or C++ code. A working knowledge of one of these languages is therefore required to gain the most benefit out of it. Even though Fortran is also supported by CUDA, for the purpose of this tutorial we only cover the CUDA C/C++. From here on, we use term CUDA C to refer "CUDA C and C++". CUDA C is essentially a C/C++ that allow one to execute function on both GPU and CPU.

Learning objectives

• Understanding the architecture of a GPU.
• Understanding the workflow of a CUDA program
• Managing GPU memory and understanding the various types of GPU memory
• Writing and compiling a minimal CUDA code and compiling CUDA examples

What is GPU ?

GPU, or a graphics processing unit, is a single-chip processor that performs rapid mathematical calculations, primarily for the purpose of rendering images. However, in the recent years, such capability is being harnessed more broadly to accelerate computational workloads of the cutting-edge scientific research areas.

What is CUDA ?

CUDA = Compute Unified Device Architecture Provides access to instructions and memory of massively parallel elements in GPU. Another definition: CUDA is scalable parallel programming model and software environment for parallel computing.

CUDA GPU Architecture

There two main components of the GPU:

• Global memory
  • Similar to CPU memory
  • Accessible by both CPU and GPU
• Streaming multiprocessors (SMs)
  • Each SM consists or many streaming processors (SPs)
  • They perform actual computations
  • Each SM has its own control init, registers, execution pipelines, etc

CUDA Programming Model

Before we start talking about programming model, let us go over some useful terminology:

• Host – The CPU and its memory (host memory)
• Device – The GPU and its memory (device memory)

The CUDA programming model is a heterogeneous model in which both the CPU and GPU are used. CUDA code is capable of managing memory of both CPU and GPU as well as executing GPU functions, called kernels. Such kernels are executed by many GPU threads in parallel. Here is the 5-steps recipe of a typical CUDA code:

• Declare and allocate both the Host and Device memories
• Initialize the Host memory
• Transfer data from Host memory to Device memory
• Execute GPU functions (kernels)
• Transfer data back to the Host memory

CUDA Execution Model

Simple CUDA code executed on GPU is called KERNEL. There are several questions we may ask at this point:

• How do you run a Kernel on a bunch of streaming multiprocessors (SMs) ?
• How do you make such run massively parallel ?

Here is the execution recipe that will answer the above questions:

• each GPU core (streaming processor) execute a sequential Thread, where Thread is a smallest set of instructions handled by the operating system's schedule.
• all GPU cores execute the kernel in a SIMT fashion (Single Instruction Multiple Threads)

Usually the following procedure is recommended when it comes to executing on GPU: 1. Copy input data from CPU memory to GPU memory 2. Load GPU program (Kernel) and execute it 3. Copy results from GPU memory back to CPU memory

CUDA Block-Threading Model

CUDA block-threading model where threads are organized into blocks while blocks are further organized into grid.

Given very large number of threads (and in order to achieve massive parallelism one has to use all the threads possible) in CUDA kernel, one needs to organize them somehow. in CUDA, all the threads are structured in threading blocks, the blocks are further organized into grids, as shown on FIg. In dividing the threads we make sure that the following is satisfied:

• threads within a block cooperate via the shared memory
• threads in different blocks can not cooperate

In this model the threads within a block work on the same set of instructions (but perhaps with different data sets) and exchange data between each other via shared memory. Threads in other blocks do the same thing (see Figure).

Threads within a block intercommunicate via shared memory .

Each thread uses IDs to decide what data to work on:

• Block IDs: 1D or 2D (blockIdx.x, blockIdx.y)
• Thread IDs: 1D, 2D, or 3D (threadIdx.x, threadIdx.y, threadIdx.z)

Such model simplifies memory addressing when processing multidimmensional data.

Threads Scheduling

Usually streaming microprocessor (SM) executes one threading block at a time. The code is executed in groups of 32 threads (called Warps). A hardware scheduller is free to assign blocks to any SM at any time. Furthermore, when SM gets the block assigned to it, it does not mean that this particular block will be executed non-stop. In fact, the scheduler can postpone/suspend execution os such block under certain conditions when e.x. data becomes unavailable (indeed, it takes quite some time to read data from the global GPU memory). When it happens, the scheduler takes another threading block which is ready for execution. This is a so called zero-overhead scheduling which makes the execution more stream-lined where SMs are not idling.

GPU Memories in CUDA

There are several type of memories exists for CUDA operations:

• Global memory
  • off-chip, good for I/O, but relatively slow
• Shared memory
  • on-chip, good for thread collaboration, very fast
• Registers& Local Memory
  • thread work space , very fast
• Constant memory

Few Basic CUDA Operations

CUDA Memory Allocation

• cudaMalloc((void**)&array, size)
  • Allocates object in the device memory. Requires address of a pointer of allocated array and size.
• cudaFree(array)
  • Deallocates object from the memory. Requires just a pointer to the array.

CUDA Data Transfers

• cudaMemcpy(array_dest, array_orig, size, direction)
  • Copy the data from either device to host or host to device . Requires pointers to the arrays, size and the direction type (cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, cudaMemcpyDeviceToDevice, etc)
• cudaMemcpyAsync
  • Same as cudaMemcpy, but transfers the data asynchronously which means it's not blocking execution of other processes.

First CUDA C Program

The following example shows how to add two numbers on the GPU using CUDA. Note that this is just an exercise, it's very simple, so it will not scale up.

__global__   void add (int *a, int *b, int *c){

	*c = *a + *b;
}
int main(void){
	int a, b, c;
	int *dev_a, *dev_b, *dev_c;
	int size = sizeof(int);

//  allocate device copies of a,b, c
cudaMalloc ( (void**) &dev_a, size);
cudaMalloc ( (void**) &dev_b, size);
cudaMalloc ( (void**) &dev_c, size);

a=2; b=7;
//  copy inputs to device
cudaMemcpy (dev_a, &a, size, cudaMemcpyHostToDevice);
cudaMemcpy (dev_b, &b, size, cudaMemcpyHostToDevice);

// launch add() kernel on GPU, passing parameters
add <<< 1, 1 >>> (dev_a, dev_b, dev_c);

// copy device result back to host
cudaMemcpy (&c, dev_c, size, cudaMemcpyDeviceToHost);

cudaFree ( dev_a ); cudaFree ( dev_b ); cudaFree ( dev_c ); 
}

Are we missing anything ? That code does not look parallel ! Solution: Lets look at what inside the triple brackets in the Kernel call and make some changes :

add <<< N, 1 >>> (dev_a, dev_b, dev_c);

Here we replaced 1 by N, so that N different cuda blocks will be executed at the same time. However, in order to achieve a parallelism we need to make some changes to the Kernel as well:

__global__   void add (int *a, int *b, int *c){

	c[blockIdx.x] = a[blockIdx.x] + b[blockIdx.x];

where blockIdx.x is the unique number identifying a cuda block. This way each cuda block adds a value from a[ ] to b[ ].

CUDA blocks-based parallelism.

Can we again make some modifications in those triple brackets ?

add <<< 1, '''N''' >>> (dev_a, dev_b, dev_c);

Now instead of blocks, the job is distributed across parallel threads. What is the advantage of having parallel threads ? Unlike blocks, threads can communicate between each other ? In other words, we parallelize across multiple threads in the block when massive communication is involved. The chunks of code that can run independently (without much communication) are distributed across parallel blocks.

Advantage of Shared Memory

So far all the memory transfers in the kernel have been done via the regular GPU (global) memory which is relatively slow. Often time we have so many communications between the threads that decreases the performance significantly. In order to address this issue there exist another type of memory called Shared memory which can be used to speed-up the memory operations between the threads. However the trick is that only the threads within a block can communicate. In order to demonstrate the usage of such shared memory we consider the dot product example where two vectors are dot-multipled. Below is the kernel:

__global__   void dot(int *a, int *b, int *c){
        int temp = a[threadIdx.x]*b[threadIdx.x]; 
}

After each thread computed its portion, we need to add everything together. Each threads has to share its data. However, the problem is that each copy of thread's temp is private.This can resolved with the use of shared memory. Below is the kernel with the modifications to account the shared memory usage:

#define N 512
__global__   void dot(int *a, int *b, int *c){
   __shared__ int temp[N];
   temp[threadIdx.x] = a[threadIdx.x]*b[threadIdx.x];
   __syncthreads(); 
   if(threadIdx.x==0){
	int sum; for(int i=0;i<N;i++) sum+= temp[i];
	*c=sum; } 
}

Basic Performance Considerations

Memory Transfers

• PCI-e is extremely slow (4-6 GB/s) compared to both host and device memories
• Minimize Host-to-Device and Device-to-Host memory copies
• Keep data on the device as long as possible
• Sometimes it is not effificient to make the Host (CPU) do non-optimal jobs; executing it on the GPU may still be faster than copying to CPU, executing, and copying back
• Use memcpy times to analyse the execution times

Bandwidth

• Always keep CUDA bandwidth in mind when chaning your code
• Know the theoretical peak bandwidth of the various data links
• Count bytes read/written and compare to the theoretical peak
• Utilize the various memory spaces depending on the situation: global, shared, constant

Common GPU Programming Strategies

• Constant memory also resides in DRAM- much slower access than shared memory
  • BUT, it’s cached !!!
  • highly efficient access for read-only, broadcast
• Carefully divide data acording to access patterns:
  • R Only: constant memory (very fast if in cache)
  • R/W within Block: shared memory (very fast)
  • R/W within Thread: registers (very fast)
  • R/W input/results: global memory (very slow)