Dar: Difference between revisions

From Alliance Doc
Jump to navigation Jump to search
No edit summary
 
(48 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Draft}}
<languages />


<translate>
<!--T:1-->
''Parent page: [[Storage and file management]]''
''Parent page: [[Storage and file management]]''


The [http://dar.linux.free.fr <code>dar</code>] (stands for Disk ARchiver) utility was written from the ground up as a modern
<!--T:2-->
The [http://dar.linux.free.fr <code>dar</code>] (stands for Disk ARchive) utility was written from the ground up as a modern
replacement to the classical Unix <code>tar</code> tool. First released in 2002, <code>dar</code> is open
replacement to the classical Unix <code>tar</code> tool. First released in 2002, <code>dar</code> is open
source, is actively maintained, and can be compiled on any Unix-like system.
source, is actively maintained, and can be compiled on any Unix-like system.


<!--T:3-->
Similar to <code>tar</code>,
Similar to <code>tar</code>,
<code>dar</code> supports full / differential / incremental backups. Unlike <code>tar</code>, each
<code>dar</code> supports full / differential / incremental backups. Unlike <code>tar</code>, each
<code>dar</code> arhive includes a file index for fast file access and restore -- this is especially useful for large
<code>dar</code> archive includes a file index for fast file access and restore -- this is especially useful for large
archives! <code>dar</code> has built-in compression on a file-by-file basis, making it more resilient
archives! <code>dar</code> has built-in compression on a file-by-file basis, making it more resilient
against data corruption, and you can optionally tell it not to compress already highly compressed files
against data corruption, and you can optionally tell it not to compress already highly compressed files
Line 17: Line 21:
data loss, and has many other desirable features. On the [http://dar.linux.free.fr <code>dar</code> page] you can find a [http://dar.linux.free.fr/doc/FAQ.html#tar detailed feature-by-feature <code>tar</code>-to-<code>dar</code> comparison].
data loss, and has many other desirable features. On the [http://dar.linux.free.fr <code>dar</code> page] you can find a [http://dar.linux.free.fr/doc/FAQ.html#tar detailed feature-by-feature <code>tar</code>-to-<code>dar</code> comparison].


== Where to find <code>dar</code> ==
== Where to find <code>dar</code> == <!--T:4-->
 
Since <code>dar</code> can be compiled on the command-line, you can install it easily on Linux and
MacOS. On Compute Canada clusters a slightly out-of-date version can be found in <code>/cvmfs</code>:


<!--T:5-->
On our clusters, <code>dar</code> is available on <code>/cvmfs</code>.
With [[Standard software environments|StdEnv/2020]]:
</translate>
<source lang="console">
<source lang="console">
[user_name@localhost]$ which dar
[user_name@localhost]$ which dar
/cvmfs/soft.computecanada.ca/nix/var/nix/profiles/16.09/bin/dar
/cvmfs/soft.computecanada.ca/gentoo/2020/usr/bin/dar
[user_name@localhost]$ dar --version
[user_name@localhost]$ dar --version
dar version 2.5.3, Copyright (C) 2002-2052 Denis Corbin
dar version 2.5.11, Copyright (C) 2002-2052 Denis Corbin
...
...
</source>
</source>
<translate>


If you want a newer version, you can compile it from source (replace 2.6.3 with the latest version number):
== Using <code>dar</code> manually == <!--T:7-->
 
<source lang="console">
[user_name@localhost]$ wget https://sourceforge.net/projects/dar/files/dar/2.6.3/dar-2.6.3.tar.gz
[user_name@localhost]$ tar xvfz dar-*.gz && /bin/rm -f dar-*.gz
[user_name@localhost]$ cd dar-*
[user_name@localhost]$ ./configure --prefix=$HOME/dar --disable-shared
[user_name@localhost]$ make
[user_name@localhost]$ make install-strip
[user_name@localhost]$ $HOME/dar/bin/dar --version
</source>


== Using <code>dar</code> manually ==
=== Basic archiving and extracting === <!--T:8-->
 
=== Basic archiving and extracting ===


<!--T:9-->
Let's say, in the current directory you have a subdirectory <code>test</code>. To pack it into an archive,
Let's say, in the current directory you have a subdirectory <code>test</code>. To pack it into an archive,
you can type in the current directory:
you can type in the current directory:
 
</translate>
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -w -c all -g test
[user_name@localhost]$ dar -w -c all -g test
</source>
</source>
 
<translate>
<!--T:10-->
This will create an archive file <code>all.1.dar</code>, where <code>all</code> is the base name and
This will create an archive file <code>all.1.dar</code>, where <code>all</code> is the base name and
<code>1</code> is the slice name. You can break a single archive into multiple slices (below). You can
<code>1</code> is the slice number. You can break a single archive into multiple slices (below). You can
include multiple directories and files into an archive, e.g.
include multiple directories and files into an archive, e.g.
 
</translate>
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -w -c all -g testDir1 -g testDir2 -g file1 -f file 2
[user_name@localhost]$ dar -w -c all -g testDir1 -g testDir2 -g file1 -g file2
</source>
</source>
 
<translate>
<!--T:11-->
Please note that all paths should be relative to the current directory.
Please note that all paths should be relative to the current directory.


<!--T:12-->
To list the archive's contents, use only the base name:
To list the archive's contents, use only the base name:


<!--T:13-->
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -l all
[user_name@localhost]$ dar -l all
</source>
</source>


<!--T:14-->
To extract a single file into a subdirectory <code>restore</code>, use the base name and the file path:
To extract a single file into a subdirectory <code>restore</code>, use the base name and the file path:


<!--T:15-->
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -R restore/ -O -w -x all -v -g test/filename
[user_name@localhost]$ dar -R restore/ -O -w -x all -v -g test/filename
</source>
</source>


<!--T:16-->
The flag <code>-O</code> will tell <code>dar</code> to ignore file ownership. Wrong ownership would be a
The flag <code>-O</code> will tell <code>dar</code> to ignore file ownership. Wrong ownership would be a
problem if you are restoring someone else's files and you are not root. However, even if you are
problem if you are restoring someone else's files and you are not root. However, even if you are
Line 81: Line 83:
disable a warning if <code>restore/test</code> already exists.
disable a warning if <code>restore/test</code> already exists.


<!--T:17-->
To extract an entire directory, type:
To extract an entire directory, type:


<!--T:18-->
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -R restore/ -O -w -x all -v -g test
[user_name@localhost]$ dar -R restore/ -O -w -x all -v -g test
</source>
</source>


<!--T:19-->
Similar to creating an archive, you can pass multiple directories and files by using multiple
Similar to creating an archive, you can pass multiple directories and files by using multiple
<code>-g</code> flags. Note that <code>dar</code> does not accept Unix wild masks after <code>-g</code>.
<code>-g</code> flags. Note that <code>dar</code> does not accept Unix wild masks after <code>-g</code>.


=== Incremental backups ===
==== A note about the Lustre filesystem ==== <!--T:86-->
 
<!--T:87-->
If the archived files are coming from a [https://www.lustre.org/ Lustre filesystem]
(typically in <code>/home</code>, <code>/project</code> or <code>/scratch</code>
on [[National_systems|our ''general-purpose'' compute clusters]]),
some <i>extended attributes</i> are saved automatically.
To see which extended attributes are assigned to each archived file, use the <code>-alist-ea</code> flag:
</translate>
 
{{Command2
|dar -l all -alist-ea
}}
 
<translate>
<!--T:88-->
We can see strings like: <code>Extended Attribute: [lustre.lov]</code>.
With this attribute, any file extraction to a location formatted in Lustre will still work as usual.
But if one tries to extract files to the [[Using_node-local_storage|node local storage]]
(also known as <code>$SLURM_TMPDIR</code>),
the extraction will show error messages like:
<code>Error while adding EA lustre.lov : Operation not supported</code>.
 
<!--T:89-->
To avoid these error messages, the <code>-u</code> flag can be used to exclude a specific type of attribute,
while the "affected" files are still extracted. For example:
</translate>
 
{{Command2
|dar -R restore/ -O -w -x all -v -g test -u 'lustre*'
}}
 
<translate>
<!--T:90-->
Another solution is to get rid of the <code>lustre.lov</code> attribute
while creating the archive with the same <code>-u</code> flag:
</translate>
 
{{Command2
|dar -w -c all -g test -u 'lustre*'
}}
 
<translate>
<!--T:91-->
In conclusion, this is necessary only if you intend to extract files to a location not formatted in Lustre.


=== Incremental backups === <!--T:20-->
<!--T:21-->
You can create differential and incremental backups with <code>dar</code>, by passing the base name of
You can create differential and incremental backups with <code>dar</code>, by passing the base name of
the reference archive with <code>-A</code>. For example, let's say on Monday you create a full backup
the reference archive with <code>-A</code>. For example, let's say on Monday you create a full backup
named <code>monday</code>:
named <code>monday</code>:


<!--T:22-->
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -w -c monday -g test
[user_name@localhost]$ dar -w -c monday -g test
</source>
</source>


<!--T:23-->
On Tuesday you modify some of the files and then include only these files into a new, incremental backup
On Tuesday you modify some of the files and then include only these files into a new, incremental backup
named <code>tuesday</code>, using <code>monday</code> archive as a reference:
named <code>tuesday</code>, using the <code>monday</code> archive as a reference:


<!--T:24-->
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -w -A monday -c tuesday -g test
[user_name@localhost]$ dar -w -A monday -c tuesday -g test
</source>
</source>


<!--T:25-->
On Wednesday you modify more files, and at the end of the day you create a new backup named
On Wednesday you modify more files, and at the end of the day you create a new backup named
<code>wednesday</code>, now using <code>tuesday</code> archive as a reference:
<code>wednesday</code>, now using the <code>tuesday</code> archive as a reference:


<!--T:26-->
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -w -A tuesday -c wednesday -g test
[user_name@localhost]$ dar -w -A tuesday -c wednesday -g test
</source>
</source>


<!--T:27-->
Now you have three files:
Now you have three files:


<!--T:28-->
<source lang="console">
<source lang="console">
[user_name@localhost]$ ls *.dar
[user_name@localhost]$ ls *.dar
Line 121: Line 180:
</source>
</source>


<!--T:29-->
The file <code>wednesday.1.dar</code> contains only the files that you modified on Wednesday, but not the
The file <code>wednesday.1.dar</code> contains only the files that you modified on Wednesday, but not the
files from Monday or Tuesday. Therefore, the command
files from Monday or Tuesday. Therefore, the command


<!--T:30-->
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -R restore -O -x wednesday
[user_name@localhost]$ dar -R restore -O -x wednesday
</source>
</source>


<!--T:31-->
will only restore files that were modified on Wednesday. To restore everything, you have to go through
will only restore files that were modified on Wednesday. To restore everything, you have to go through
all backups in the chronological order:
all backups in the chronological order:


<!--T:32-->
<source lang="console">
<source lang="console">
[user_name@localhost]$ dar -R restore -O -w -x monday      # restore the full backup
[user_name@localhost]$ dar -R restore -O -w -x monday      # restore the full backup
Line 137: Line 200:
</source>
</source>


=== Limiting the size of each slice ===
=== Limiting the size of each slice === <!--T:33-->
 
<!--T:34-->
To limit the maximum size of each slice in bytes, use the flag <code>-s</code> followed by a number and one of k/M/G/T. For example, for a 1340 MB archive, the command
 
<!--T:35-->
<source lang="console">
[user_name@localhost]$ dar -s 100M -w -c monday -g test
</source>
 
<!--T:36-->
will create 14 slices named <code>monday.{1..14}.dar</code>. To extract from all of these, use their base name:
 
<!--T:37-->
<source lang="console">
[user_name@localhost]$ dar -O -x monday
</source>
 
== External scripts == <!--T:84-->
 
<!--T:85-->
One of our team members has written bash functions that can facilitate the use of <code>dar</code>. You can use these functions as inspiration to write your own scripts. See [https://github.com/razoumov/sharedSnippets here] for details.


== Using <code>dar</code> via functions ==
</translate>

Latest revision as of 20:45, 15 July 2024

Other languages:

Parent page: Storage and file management

The dar (stands for Disk ARchive) utility was written from the ground up as a modern replacement to the classical Unix tar tool. First released in 2002, dar is open source, is actively maintained, and can be compiled on any Unix-like system.

Similar to tar, dar supports full / differential / incremental backups. Unlike tar, each dar archive includes a file index for fast file access and restore -- this is especially useful for large archives! dar has built-in compression on a file-by-file basis, making it more resilient against data corruption, and you can optionally tell it not to compress already highly compressed files such as mp4 and gz. dar supports strong encryption, can split archives at 1-byte resolution, supports extended file attributes, sparse files, hard and symbolic (soft) links, can detect data corruption in both headers and saved data and recover with minimal data loss, and has many other desirable features. On the dar page you can find a detailed feature-by-feature tar-to-dar comparison.

Where to find dar

On our clusters, dar is available on /cvmfs. With StdEnv/2020: 

[user_name@localhost]$ which dar
/cvmfs/soft.computecanada.ca/gentoo/2020/usr/bin/dar
[user_name@localhost]$ dar --version
dar version 2.5.11, Copyright (C) 2002-2052 Denis Corbin
...

Using dar manually

Basic archiving and extracting

Let's say, in the current directory you have a subdirectory test. To pack it into an archive, you can type in the current directory: 

[user_name@localhost]$ dar -w -c all -g test

This will create an archive file all.1.dar, where all is the base name and 1 is the slice number. You can break a single archive into multiple slices (below). You can include multiple directories and files into an archive, e.g. 

[user_name@localhost]$ dar -w -c all -g testDir1 -g testDir2 -g file1 -g file2

Please note that all paths should be relative to the current directory.

To list the archive's contents, use only the base name: 

[user_name@localhost]$ dar -l all

To extract a single file into a subdirectory restore, use the base name and the file path: 

[user_name@localhost]$ dar -R restore/ -O -w -x all -v -g test/filename

The flag -O will tell dar to ignore file ownership. Wrong ownership would be a problem if you are restoring someone else's files and you are not root. However, even if you are restoring your own files, dar will throw a message that you are doing this as non-root and will ask you to confirm. To disable this warning, use -O. The flag -w will disable a warning if restore/test already exists.

To extract an entire directory, type: 

[user_name@localhost]$ dar -R restore/ -O -w -x all -v -g test

Similar to creating an archive, you can pass multiple directories and files by using multiple -g flags. Note that dar does not accept Unix wild masks after -g.

A note about the Lustre filesystem

If the archived files are coming from a Lustre filesystem (typically in /home, /project or /scratch on our general-purpose compute clusters), some extended attributes are saved automatically. To see which extended attributes are assigned to each archived file, use the -alist-ea flag: 

[name@server ~]$ dar -l all -alist-ea


We can see strings like: Extended Attribute: [lustre.lov]. With this attribute, any file extraction to a location formatted in Lustre will still work as usual. But if one tries to extract files to the node local storage (also known as $SLURM_TMPDIR), the extraction will show error messages like: Error while adding EA lustre.lov : Operation not supported.

To avoid these error messages, the -u flag can be used to exclude a specific type of attribute, while the "affected" files are still extracted. For example: 

[name@server ~]$ dar -R restore/ -O -w -x all -v -g test -u 'lustre*'


Another solution is to get rid of the lustre.lov attribute while creating the archive with the same -u flag: 

[name@server ~]$ dar -w -c all -g test -u 'lustre*'


In conclusion, this is necessary only if you intend to extract files to a location not formatted in Lustre.

Incremental backups

You can create differential and incremental backups with dar, by passing the base name of the reference archive with -A. For example, let's say on Monday you create a full backup named monday: 

[user_name@localhost]$ dar -w -c monday -g test

On Tuesday you modify some of the files and then include only these files into a new, incremental backup named tuesday, using the monday archive as a reference: 

[user_name@localhost]$ dar -w -A monday -c tuesday -g test

On Wednesday you modify more files, and at the end of the day you create a new backup named wednesday, now using the tuesday archive as a reference: 

[user_name@localhost]$ dar -w -A tuesday -c wednesday -g test

Now you have three files: 

[user_name@localhost]$ ls *.dar
monday.1.dar     tuesday.1.dar    wednesday.1.dar

The file wednesday.1.dar contains only the files that you modified on Wednesday, but not the files from Monday or Tuesday. Therefore, the command 

[user_name@localhost]$ dar -R restore -O -x wednesday

will only restore files that were modified on Wednesday. To restore everything, you have to go through all backups in the chronological order: 

[user_name@localhost]$ dar -R restore -O -w -x monday      # restore the full backup
[user_name@localhost]$ dar -R restore -O -w -x tuesday     # restore the first incremental backup
[user_name@localhost]$ dar -R restore -O -w -x wednesday   # restore the second incremental backup

Limiting the size of each slice

To limit the maximum size of each slice in bytes, use the flag -s followed by a number and one of k/M/G/T. For example, for a 1340 MB archive, the command 

[user_name@localhost]$ dar -s 100M -w -c monday -g test

will create 14 slices named monday.{1..14}.dar. To extract from all of these, use their base name: 

[user_name@localhost]$ dar -O -x monday

External scripts

One of our team members has written bash functions that can facilitate the use of dar. You can use these functions as inspiration to write your own scripts. See here for details.

Retrieved from "https://docs.alliancecan.ca/mediawiki/index.php?title=Dar&oldid=157711"