Star-CCM+: Difference between revisions

From Alliance Doc
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 29: Line 29:


<!--T:5-->
<!--T:5-->
When submitting jobs on a cluster for the first time, you must set up the environment to use your license. If you are using CD-adapco's online <i>pay-on-usage</i> server, simply create a <code>~/.licenses/starccm.lic</code> file as shown in the <b>POD license file</b> section above and license checkouts should immediately work.  If however you are using an internal license server, then after creating <code>~/.licenses/starccm.lic</code> you must submit a problem ticket to [[technical support]] so we can help co-ordinate the necessary one time network firewall changes required to access it.  If you still have problems getting the licensing to work then try removing or renaming file <code>~/.flexlmrc</code> since previous search paths and/or license server settings maybe stored in it which conflict with your current <code>starccm.lic</code> settings.  Not e that files from previous may have accumulated a significant amount of disc space in hidden directories named <code>.star-version_number</code> if you have run many long jobs in the past using older slurm scripts or if you regularly run starccm+ in gui mode.  These can be removed periodically by carefully running <code>rm -ri ~/.starccm*</code> and replying yes as prompted.
When submitting jobs on a cluster for the first time, you must set up the environment to use your license. If you are using Siemans remote <i>pay-on-usage</i> license server then create a <code>~/.licenses/starccm.lic</code> file as shown in the <b>Configuring your account- POD license file</b> section above and license checkouts should immediately work.  If however you are using an institutional license server, then after creating your <code>~/.licenses/starccm.lic</code> file you must also submit a problem ticket to [[technical support]] so we can help co-ordinate the necessary one time network firewall changes required to access it (assuming the server has never been setup to be accessed from the Alliance cluster you will be using).  If you still have problems getting the licensing to work then try removing or renaming file <code>~/.flexlmrc</code> since previous search paths and/or license server settings maybe stored in it.  Note that temporary output files from starccm jobs runs may accumulate in hidden directories named <code>~/.star-version_number</code> consuming valuable quota space.  These can be removed by periodically running <code>rm -ri ~/.starccm*</code> and replying yes when prompted.


<!--T:263-->
<!--T:263-->
Line 57: Line 57:


<!--T:266-->
<!--T:266-->
export LM_PROJECT='YOUR CD-ADAPCO PROJECT ID GOES HERE'
SIM_FILE='mysample.sim'       # Specify your input sim filename
export CDLMD_LICENSE_FILE="1999@flex.cd-adapco.com"
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename


<!--T:267-->
<!--T:265-->
export STARCCM_TMP="${SCRATCH}/.starccm-${EBVERSIONSTARCCM}"
# Comment the next line when using an institutional license server
mkdir -p "$STARCCM_TMP"
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key


<!--T:268-->
# ------- no changes required below this line --------
slurm_hl2hl.py --format STAR-CCM+ > $STARCCM_TMP/machinefile-$SLURM_JOB_ID


<!--T:269-->
<!--T:267-->
slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))


<!--T:270-->
<!--T:270-->
# Remove "-power -podkey $LM_PROJECT" when using an institutional license server
echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
starccm+ -batch -power -podkey $LM_PROJECT -np $NCORE -licpath $CDLMD_LICENSE_FILE -nbuserdir $SLURM_TMPDIR -machinefile $STARCCM_TMP/machinefile-$SLURM_JOB_ID $PWD/your-file.sim
if [ -n "$LM_PROJECT" ]; then
 
  echo "Siemens PoD license server:"
<!--T:271-->
  starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE
}}</tab>
else
  echo "Institutional license server:"
  starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE
fi
}}
</tab>
<tab name="Cedar" >
<tab name="Cedar" >
{{File
{{File
Line 100: Line 105:


<!--T:274-->
<!--T:274-->
export LM_PROJECT='YOUR CD-ADAPCO PROJECT ID GOES HERE'
SIM_FILE='mysample.sim'       # Specify your input sim filename
export CDLMD_LICENSE_FILE="1999@flex.cd-adapco.com"
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename


<!--T:301-->
<!--T:275-->
export STARCCM_TMP="${SCRATCH}/.starccm-${EBVERSIONSTARCCM}"
# Comment the next line when using an institutional license server
mkdir -p "$STARCCM_TMP"
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key


<!--T:302-->
# ------- no changes required below this line --------
slurm_hl2hl.py --format STAR-CCM+ > $STARCCM_TMP/machinefile-$SLURM_JOB_ID


<!--T:303-->
<!--T:301-->
slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))


<!--T:278-->
<!--T:278-->
# Remove "-power -podkey $LM_PROJECT" when using an institutional license server
echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
starccm+ -batch -power -podkey $LM_PROJECT -np $NCORE -licpath $CDLMD_LICENSE_FILE -nbuserdir $SLURM_TMPDIR -machinefile $STARCCM_TMP/machinefile-$SLURM_JOB_ID $PWD/your-file.sim -mpi intel -fabric psm2
if [ -n "$LM_PROJECT" ]; then
 
  echo "Siemens PoD license server:"
<!--T:279-->
  starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi intel -fabric psm2
}}</tab>
else
  echo "Institutional license server:"
  starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi intel -fabric psm2
fi
}}
</tab>
<tab name="Graham" >
<tab name="Graham" >
{{File
{{File
Line 143: Line 153:


<!--T:282-->
<!--T:282-->
export LM_PROJECT='YOUR CD-ADAPCO PROJECT ID GOES HERE'
SIM_FILE='mysample.sim'       # Specify your input sim filename
export CDLMD_LICENSE_FILE="1999@flex.cd-adapco.com"
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename
 
<!--T:283-->
# Comment the next line when using an institutional license server
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key
 
# ------- no changes required below this line --------


<!--T:306-->
<!--T:306-->
slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile-$SLURM_JOB_ID
slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
 
<!--T:307-->
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))


<!--T:287-->
<!--T:287-->
# Remove "-power -podkey $LM_PROJECT" when using an institutional license server
echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -licpath $CDLMD_LICENSE_FILE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile-$SLURM_JOB_ID $SLURM_SUBMIT_DIR/your-file.sim -mpi intel -fabric psm2
if [ -n "$LM_PROJECT" ]; then
 
  echo "Siemens PoD license server:"
<!--T:288-->
  starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi intel -fabric psm2
}}</tab>
else
  echo "Institutional license server:"
  starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi intel -fabric psm2
fi
}}
</tab>
<tab name="Narval" >
<tab name="Narval" >
{{File
{{File
Line 182: Line 201:


<!--T:291-->
<!--T:291-->
export LM_PROJECT='YOUR CD-ADAPCO PROJECT ID GOES HERE'
SIM_FILE='mysample.sim'       # Specify your input sim filename
export CDLMD_LICENSE_FILE="1999@flex.cd-adapco.com"
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename


<!--T:292-->
<!--T:292-->
export STARCCM_TMP="${SCRATCH}/.starccm-${EBVERSIONSTARCCM}"
# Comment the next line when using an institutional license server
mkdir -p "$STARCCM_TMP"
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key


<!--T:293-->
# ------- no changes required below this line --------
slurm_hl2hl.py --format STAR-CCM+ > $STARCCM_TMP/machinefile-$SLURM_JOB_ID


<!--T:294-->
<!--T:292-->
slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))


<!--T:295-->
<!--T:295-->
# Remove "-power -podkey $LM_PROJECT" when using an institutional license server
echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -licpath $CDLMD_LICENSE_FILE -nbuserdir $SLURM_TMPDIR -machinefile $STARCCM_TMP/machinefile-$SLURM_JOB_ID $PWD/your-file.sim -mpi openmpi
if [ -n "$LM_PROJECT" ]; then
 
  echo "Siemens PoD license server:"
<!--T:296-->
  starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi openmpi
else
  echo "Institutional license server:"
  starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi openmpi
fi
}}
}}
</tab>
</tab>
Line 230: Line 253:


<!--T:317-->
<!--T:317-->
export LM_PROJECT='YOUR CD-ADAPCO PROJECT ID GOES HERE'
SIM_FILE='mysample.sim'      # Specify input sim filename
export CDLMD_LICENSE_FILE="1999@127.0.0.1"
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename
 
<!--T:321-->
# Comment the next line when using an institutional license server
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key
 
# These settings are used instead of your ~/.licenses/starccm.lic
# (settings shown will use the cd-adapco pod license server)
FLEXPORT=1999                   # Specify server static flex port
VENDPORT=2099                    # Specify server static vendor port
LICSERVER=flex.cd-adapco.com    # Specify license server hostname
 
<!--T:319-->
# ------- no changes required below this line --------


<!--T:318-->
<!--T:318-->
ssh nia-gw -L 1999:flex.cd-adapco.com:1999 -L 2099:flex.cd-adapco.com:2099 -N -f
export CDLMD_LICENSE_FILE="$FLEXPORT@127.0.0.1"
echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
ssh nia-gw -L $FLEXPORT:$LICSERVER:$FLEXPORT -L $VENDPORT:$LICSERVER:$VENDPORT -N -f


<!--T:319-->
<!--T:320-->
cd $SLURM_SUBMIT_DIR
slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
slurm_hl2hl.py --format STAR-CCM+ > $SLURM_SUBMIT_DIR/machinefile-$SLURM_JOB_ID
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))
   
   
Line 248: Line 284:
while [ $i -le 5 ] && [ $RET -ne 0 ]; do
while [ $i -le 5 ] && [ $RET -ne 0 ]; do
         [ $i -eq 1 ] {{!}}{{!}} sleep 5
         [ $i -eq 1 ] {{!}}{{!}} sleep 5
        echo "Attempt number: "$I
          echo "Attempt number: "$I
        # Remove "-power -podkey $LM_PROJECT" when using an institutional license server…
          if [ -n "$LM_PROJECT" ]; then
        starccm+ -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_SUBMIT_DIR/machinefile-$SLURM_JOB_ID $SLURM_SUBMIT_DIR/your-simulation-file.java $SLURM_SUBMIT_DIR/your-simulation-file.sim > $SLURM_JOB_ID.results
          echo "Siemens PoD license server:"
          starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE
        else
          echo "Institutional license server:"
          starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE
        fi
         RET=$?
         RET=$?
         i=$((i+1))
         i=$((i+1))
  done
done
exit $RET
exit $RET
}}
}}

Revision as of 21:57, 29 October 2024

Other languages:

STAR-CCM+ is a multidisciplinary engineering simulation suite to model acoustics, fluid dynamics, heat transfer, rheology, multiphase flows, particle flows, solid mechanics, reacting flows, electrochemistry, and electromagnetics. It is developed by Siemens.

License limitations

We have the authorization to host STAR-CCM+ binaries on our servers, but we don't provide licenses. You will need to have your own license in order to use this software. A remote POD license can be purchased directly from Siemens. Alternatively, a local license hosted at your institution can be used, providing it can be accessed through the firewall from the cluster where jobs are to be run.

Configuring your account

In order to configure your account to use a license server with our Star-CCM+ module, create a license file $HOME/.licenses/starccm.lic with the following layout:

File : starccm.lic

SERVER <server> ANY <port>
USE_SERVER


where <server> and <port> should be changed to specify the hostname (or ip address) and the static vendor port of the license server respectively.

POD license file

Researchers with a POD license purchased from Siemens can specify it by creating a ~/.licenses/starccm.lic text file as follows:

File : starccm.lic

SERVER flex.cd-adapco.com ANY 1999
USE_SERVER


on any cluster (except Niagara) as well as setting LM_PROJECT to your YOUR CD-ADAPCO PROJECT ID in your slurm script. Please note that manually setting CDLMD_LICENSE_FILE="<port>@<server>" in your slurm script will no longer be required.

Cluster batch job submission

Select one of the available modules:

  • starccm for the double-precision flavour (i.e., module load starccm/19.04.007-R8),
  • starccm-mixed for the mixed-precision flavour (i.e., module load starccm-mixed/19.04.007).

When submitting jobs on a cluster for the first time, you must set up the environment to use your license. If you are using Siemans remote pay-on-usage license server then create a ~/.licenses/starccm.lic file as shown in the Configuring your account- POD license file section above and license checkouts should immediately work. If however you are using an institutional license server, then after creating your ~/.licenses/starccm.lic file you must also submit a problem ticket to technical support so we can help co-ordinate the necessary one time network firewall changes required to access it (assuming the server has never been setup to be accessed from the Alliance cluster you will be using). If you still have problems getting the licensing to work then try removing or renaming file ~/.flexlmrc since previous search paths and/or license server settings maybe stored in it. Note that temporary output files from starccm jobs runs may accumulate in hidden directories named ~/.star-version_number consuming valuable quota space. These can be removed by periodically running rm -ri ~/.starccm* and replying yes when prompted.

File : starccm_job.sh

#!/bin/bash

#SBATCH --account=def-group   # Specify some account
#SBATCH --time=00-01:00       # Time limit: dd-hh:mm
#SBATCH --nodes=1             # Specify 1 or more nodes
#SBATCH --cpus-per-task=40    # Request all cores per node
#SBATCH --mem=0               # Request all memory per node
#SBATCH --ntasks-per-node=1   # Do not change this value

#module load StdEnv/2020      # Versions < 18.06.006
module load StdEnv/2023

#module load starccm/18.06.006-R8
module load starccm-mixed/18.06.006

SIM_FILE='mysample.sim'       # Specify your input sim filename
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename

# Comment the next line when using an institutional license server
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key

# ------- no changes required below this line --------

slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))

echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
if [ -n "$LM_PROJECT" ]; then
   echo "Siemens PoD license server:"
   starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE
else
   echo "Institutional license server:"
   starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE
fi


File : starccm_job.sh

#!/bin/bash

#SBATCH --account=def-group   # Specify some account
#SBATCH --time=00-01:00       # Time limit: dd-hh:mm
#SBATCH --nodes=1             # Specify 1 or more nodes
#SBATCH --cpus-per-task=48    # or 32 Request all cores per node
#SBATCH --mem=0               # Request all memory per node
#SBATCH --ntasks-per-node=1   # Do not change this value

#module load StdEnv/2020      # Versions < 18.06.006
module load StdEnv/2023

#module load starccm/18.06.006-R8
module load starccm-mixed/18.06.006

SIM_FILE='mysample.sim'       # Specify your input sim filename
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename

# Comment the next line when using an institutional license server
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key

# ------- no changes required below this line --------

slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))

echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
if [ -n "$LM_PROJECT" ]; then
   echo "Siemens PoD license server:"
   starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi intel -fabric psm2
else
   echo "Institutional license server:"
   starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi intel -fabric psm2
fi


File : starccm_job.sh

#!/bin/bash

#SBATCH --account=def-group   # Specify some account
#SBATCH --time=00-01:00       # Time limit: dd-hh:mm
#SBATCH --nodes=1             # Specify 1 or more nodes
#SBATCH --cpus-per-task=32    # or 44 Request all cores per node
#SBATCH --mem=0               # Request all memory per node
#SBATCH --ntasks-per-node=1   # Do not change this value

#module load StdEnv/2020      # Versions < 18.06.006
module load StdEnv/2023

#module load starccm/18.06.006-R8
module load starccm-mixed/18.06.006

SIM_FILE='mysample.sim'       # Specify your input sim filename
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename

# Comment the next line when using an institutional license server
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key

# ------- no changes required below this line --------

slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))

echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
if [ -n "$LM_PROJECT" ]; then
   echo "Siemens PoD license server:"
   starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi intel -fabric psm2
else
   echo "Institutional license server:"
   starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi intel -fabric psm2
fi


File : starccm_job.sh

#!/bin/bash

#SBATCH --account=def-group   # Specify some account
#SBATCH --time=00-01:00       # Time limit: dd-hh:mm
#SBATCH --nodes=1             # Specify 1 or more nodes
#SBATCH --cpus-per-task=64    # Request all cores per node
#SBATCH --mem=0               # Request all memory per node
#SBATCH --ntasks-per-node=1   # Do not change this value

#module load StdEnv/2020      # Versions < 18.06.006
module load StdEnv/2023

#module load starccm/18.06.006-R8
module load starccm-mixed/18.06.006

SIM_FILE='mysample.sim'       # Specify your input sim filename
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename

# Comment the next line when using an institutional license server
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key

# ------- no changes required below this line --------

slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))

echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
if [ -n "$LM_PROJECT" ]; then
   echo "Siemens PoD license server:"
   starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi openmpi
else
   echo "Institutional license server:"
   starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE -mpi openmpi
fi


File : starccm_job.sh

#!/bin/bash

#SBATCH --account=def-group   # Specify some account
#SBATCH --time=00-01:00       # Time limit: dd-hh:mm
#SBATCH --nodes=1             # Specify 1 or more nodes
#SBATCH --cpus-per-task=40    # Request all cores per node
#SBATCH --mem=0               # Request all memory per node
#SBATCH --ntasks-per-node=1   # Do not change this value
#SBATCH --mail-type=BEGIN
#SBATCH --mail-type=END
 
module load CCEnv

#module load StdEnv/2020      # Versions < 18.06.006
module load StdEnv/2023

#module load starccm/18.06.006-R8
module load starccm-mixed/18.06.006

SIM_FILE='mysample.sim'       # Specify input sim filename
#JAVA_FILE='mymacros.java'    # Uncomment to specify an input java filename

# Comment the next line when using an institutional license server
LM_PROJECT='my22digitpodkey'  # Specify your Siemens Power on Demand (PoD) Key

# These settings are used instead of your ~/.licenses/starccm.lic
# (settings shown will use the cd-adapco pod license server)
FLEXPORT=1999                    # Specify server static flex port
VENDPORT=2099                    # Specify server static vendor port
LICSERVER=flex.cd-adapco.com     # Specify license server hostname

# ------- no changes required below this line --------

export CDLMD_LICENSE_FILE="$FLEXPORT@127.0.0.1"
echo "CDLMD_LICENSE_FILE= $CDLMD_LICENSE_FILE"
ssh nia-gw -L $FLEXPORT:$LICSERVER:$FLEXPORT -L $VENDPORT:$LICSERVER:$VENDPORT -N -f

slurm_hl2hl.py --format STAR-CCM+ > $SLURM_TMPDIR/machinefile
NCORE=$((SLURM_NNODES * SLURM_CPUS_PER_TASK * SLURM_NTASKS_PER_NODE))
 
# Workaround for license failures: 
# until the exit status is equal to 0, we try to get Star-CCM+ to start (here, for at least 5 times).
i=1
RET=-1
while [ $i -le 5 ] && [ $RET -ne 0 ]; do
        [ $i -eq 1 ] || sleep 5
          echo "Attempt number: "$I
          if [ -n "$LM_PROJECT" ]; then
          echo "Siemens PoD license server:"
          starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -power -podkey $LM_PROJECT -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE
        else
          echo "Institutional license server:"
          starccm+ -jvmargs -Xmx4G -jvmargs -Djava.io.tmpdir=$SLURM_TMPDIR -batch -np $NCORE -nbuserdir $SLURM_TMPDIR -machinefile $SLURM_TMPDIR/machinefile $JAVA_FILE $SIM_FILE
        fi
        RET=$?
        i=$((i+1))
done
exit $RET


Remote visualization

Preparation

o To set up your account for remote visualization:

  1. Create ~/.licenses/starccm.lic as described above.
  2. Users with a POD license should also
set: export LM_PROJECT='CD-ADAPCO PROJECT ID' and
add: -power to the other command line options shown below.

Compute nodes

Connect with TigerVNC and open a terminal window…

STAR-CCM+ 15.04.010 (or newer versions)
module load StdEnv/2020
module load starccm-mixed/17.02.007 **OR** starccm/17.02.007-R8
starccm+
STAR-CCM+ 14.06.010, 14.04.013, 14.02.012
module load StdEnv/2016
module load starccm-mixed/14.06.010 **OR** starccm/14.06.010-R8
starccm+
STAR-CCM+ 13.06.012 (or older versions)
module load StdEnv/2016
module load starccm-mixed/13.06.012 **OR** starccm/13.06.012-R8
starccm+ -mesa

VDI nodes

Connect to gra-vdi.alliancecan.ca with TigerVNC and login. Once the Remote Desktop appears click Applications -> Systems Tools -> Mate Terminal to open a terminal window and then specify which starccm version to load as shown below. Note that after you have loaded a StdEnv you may use the module avail starccm-mixed command to display which starccm versions are available. Note that currently only the MESA implementation of OpenGL is usable on gra-vdi with starccm due to virtualgl issues that otherwise provide local gpu hardware acceleration for OpenGL driven graphics.

STAR-CCM+ 18.04.008 (or newer versions)
module load CcEnv StdEnv/2023
module load starccm-mixed/18.04.008 **OR** starccm/18.04.008-R8
starccm+ -mesa
STAR-CCM+ 15.04.010 --> 18.02.008 (version range)
module load CcEnv StdEnv/2020
module load starccm-mixed/15.04.010 **OR** starccm/15.04.010-R8
starccm+ -mesa
STAR-CCM+ 13.06.012 (or older versions)
module load CcEnv StdEnv/2016
module load starccm-mixed/13.06.012 **OR** starccm/13.06.012-R8
starccm+ -mesa
Retrieved from "https://docs.alliancecan.ca/mediawiki/index.php?title=Star-CCM%2B&oldid=163621"