Nextflow

Nextflow is software for running reproducible scientific workflows. The term Nextflow is used to describe both the domain-specific-language (DSL) the pipelines are written in, and the software used to interpret those workflows.

Usage

On our systems, Nextflow is provided as a module you can load with module load nextflow.

While you can build your own workflow, you can also rely on the published nf-core pipelines. We will describe here a simple configuration that will let you run nf-core pipelines on our systems and help you to configure Nextflow properly for your own pipelines.

Our example uses the nf-core/smrnaseq pipeline.

Installation

The following procedure is to be run on a login node.

Start by installing a pip package to help with the setup; please note that the nf-core tools can be slow to install.

module purge # we make sure that some previously loaded package are not polluting the installation 
module load python/3.8
module load postgresql/15.3
python -m venv nf-core-env
source nf-core-env/bin/activate
python -m pip install nf_core==2.6

Set the name of the pipeline to be tested, and load Nextflow and Apptainer. (Apptainer is the successor to the Singularity container utility.) Nextflow integrates well with Apptainer.

export NFCORE_PL=smrnaseq
export PL_VERSION=1.1.0
module load nextflow/22.10.6
module load apptainer/1.1.6

An important step is to download all the Apptainer images that will be used to run the pipeline at the same time we download the workflow itself. If this isn't done, Nextflow will try to download the images from the compute nodes, just before steps are executed. This would not work on most of our clusters since there is no internet connection on the compute nodes.

Create a folder where images will be stored and set the environment variable NXF_SINGULARITY_CACHEDIR to it. Workflow images tend to be big, so do not store them in your $HOME space because it has a small quota. Instead, store them in /project space.

mkdir /project/<def-group>/NXF_SINGULARITY_CACHEDIR
export NXF_SINGULARITY_CACHEDIR=/project/<def-group>/NXF_SINGULARITY_CACHEDIR

You should share this folder with other members of your group who are planning to use Nextflow with Apptainer, in order to reduce duplication. Also, you may add the export command to your ~/.bashrc as a convenience.

The following command downloads the smrnaseq pipeline to your /scratch directory and puts all the images in the cache directory.

cd ~/scratch
nf-core download --singularity-cache-only --container singularity  --compress none -r ${PL_VERSION}  -p 6  ${NFCORE_PL}

This workflow downloads 18 containers for a total of about 4Go and creates an nf-core-${NFCORE_PL}-${PL_VERSION} folder with the workflow and config subfolders. The config subfolder includes the institutional configuration while the workflow itself is in the workflow subfolder.

This is what a typical nf-core pipeline looks like:

$ ls nf-core-${NFCORE_PL}-${PL_VERSION}/workflow
assets  bin  CHANGELOG.md  CODE_OF_CONDUCT.md  conf  Dockerfile  docs  environment.yml  lib  LICENSE  main.nf  nextflow.config  nextflow_schema.json  README.md

Once the pipeline is ready to be launched, Nextflow will look at the nextflow.config file and also at the ~/.nextflow/config file (if it exists) to control how to run the workflow. The nf-core pipelines all have a default config, a test config, and container configs (singularity, podman, etc). You also need a custom config for the cluster (Narval, Béluga, Cedar or Graham) you are running on. Nextflow pipelines could also run on Niagara if they were designed with that specific cluster in mind, but we generally discourage you to run an nf-core or any other generic Nextflow pipeline.

A configuration for our clusters

You can use the following config by changing the default value for nf-core processes and enter the correct information for the Béluga and Narval clusters. This config is saved in a profile block that will be loaded at runtime.

File : ~/.nextflow/config

singularity{
  autoMounts = true
}

process {
  executor = 'slurm' 
  pollInterval = '60 sec'
  clusterOptions = '--account=<my-account>'
  submitRateLimit = '60/1min'
  queueSize = 100 
  errorStrategy = 'retry'
  maxRetries = 1
  errorStrategy = { task.exitStatus in [125,139] ? 'retry' : 'finish' }
  memory = { check_max( 4.GB * task.attempt, 'memory' ) }
  cpu = 1  
  time = '3h' 
}

profiles {
  beluga{
    max_memory='186G'
    max_cpu=40
    max_time='168h'
  }
  narval{
    max_memory='249G'
    max_cpu=64
    max_time='168h'
  }
}

Replace <my-account> with your own account, which looks like def-pname. The singularity.autoMounts = true bits ensure that all the folder will be properly mounted inside the singularity container.

This configuration ensures that there are no more than 100 jobs in the Slurm queue and that only 60 jobs are submitted per minute. It indicates that Béluga machines have 40 cores and 186G of RAM with a maximum walltime of one week (168 hours).

The config is linked to the system you are running on, but it is also related to the pipeline itself. For example, here cpu = 1 is the default value, but steps in the pipeline can have more than that. This can get quite complicated and labels in the workflow/conf/base.config file are used to identify a step with a specific configuration, which is not covered in this page.

The script implements a default restart behavior that automatically adds some memory on failed steps that have ret code 125 (out of memory) or 139 (omm killed because the process used more memory than what was allowed by cgroup).

Running the pipeline

Use the two profiles provided by nf-core—test and singularity—and the profile we have just created for Béluga. Note that Nextflow is mainly written in Java which tends to use a lot of virtual memory. On the Narval cluster that won't be a problem, but with the Béluga login node, you will need to change the virtual memory to run most workflows. To set the virtual memory limit to 40G, use the ulimit -v 40000000 command. We also used a terminal multiplexer, so the Nextflow pipeline will still run if you are disconnected and you will be able to reconnect to the controller process. Note that running Nextflow on login nodes is easy on Béluga and Naval, but harder on Graham and Cedar since the login node virtual memory limit cannot be changed on these clusters; we recommend launching Nextflow from a compute node, where the virtual memory is never limited.

nextflow run nf-core-${NFCORE_PL}-${PL_VERSION}/workflow -profile test,singularity,beluga  --outdir ${NFCORE_PL}_OUTPUT

So now you have started the Nextflow sub-scheduler on the login node. This process sends jobs to Slurm when they are ready to be processed.

You can see the progression of the pipeline. You can also open a new session on the cluster or detach from the tmux session to have a look at the jobs in the Slurm queue with squeue -u $USER

Known issues

Some users have reported getting a SIGBUS error from the Nextflow main process. We suspect this is connected with these Nextflow issues:

* https://github.com/nextflow-io/nextflow/issues/842
* https://github.com/nextflow-io/nextflow/issues/2774

Setting the environment variable NXF_OPTS="-Dleveldb.mmap=false" when executing nextflow is reported to solve the problem.