Star-CCM+

STAR-CCM+ is a multidisciplinary engineering simulation suite, supporting the modelling of acoustics, fluid dynamics, heat transfer, rheology, multiphase flows, particle flows, solid mechanics, reacting flows, electrochemistry, and electromagnetics. It is developed by Siemens.

License limitations

Compute Canada has the authorization to host STAR-CCM+ binaries on its servers, but does not provide licenses to users. You will need to have your own license in order to use this software.

Configuring your account

In order to configure your account to use your own license server with our Star-CCM+ module, create a license file $HOME/.licenses/starccm.lic with the content :

File : starccm.lic

SERVER IP ANY PORT
USE_SERVER

where you change IP and PORT with the IP address and the port used by the license server.

Cluster batch job submission

Select one of the available modules:

• starccm for the double-precision flavour,
• starccm-mixed for the mixed precision flavour.

Star-CCM+ comes bundled with two different distributions of MPI:

• IBM Platform MPI is the default distribution, but does not work on Cedar's Intel OmniPath network fabric;
• Intel MPI is specified with option -mpi intel.

Neither IBM Platform MPI nor Intel MPI are tightly coupled with our scheduler; you must therefore tell starccm+ which hosts to use by means of a file containing the list of available hosts. To produce this file, we provide the slurm_hl2hl.py script, which will output the list of hosts when called with the option --format STAR-CCM+. This list can then be written to a file and read by Star-CCM+. Also, because these distributions of MPI are not tightly integrated with our scheduler, you should use options --ntasks-per-node=1 and --cpus-per-task=32 when submitting a job. As a special case, when submitting jobs with version 14.02.012 modules on Cedar, one must add -fabric psm2 to the starccm+ command line (last line in the below Cedar tab of the starccm_job.sh slurm script) for multi-node jobs to run properly otherwise no output will be obtained.

You will also need to set up your job environment to use your license. If you are using CD-adapco's online "pay-on-usage" server, the configuration is rather simple. If you are using an internal license server, please contact us so that we can help you setup the access to it. When all is done, your submit script should look like this, where 2 nodes are used for 1 hour; you can adjust these numbers to fit your needs.

Note that at Niagara the compute nodes mount the $HOME filesystem as "read-only". Therefore it is important to define the environment variable $STARCCM_TMP and point it to a location on $SCRATCH, which is unique to the version of StarCCM+. Otherwise StarCCM+ will try to create such a directory in the $HOME and crash in the process.

GrahamCedarNiagara

File : starccm_job.sh

#!/bin/bash
#SBATCH --account=def-group   # specify some account
#SBATCH --time=00-01:00       # Time limit: dd-hh:mm
#SBATCH --nodes=2             # Specify 1 or more nodes
#SBATCH --cpus-per-task=32    # Request all cores per node
#SBATCH --mem=0               # Request all memory per node
#SBATCH --ntasks-per-node=1   # Do not change this value

# Pick an appropriate STARCCM version and precision
# module load starccm/14.06.013-R8
module load starccm-mixed/14.06.013

export LM_PROJECT='YOUR CD-ADAPCO PROJECT ID GOES HERE'
export CDLMD_LICENSE_FILE="1999@flex.cd-adapco.com"

export STARCCM_TMP="${SCRATCH}/.starccm-${EBVERSIONSTARCCM}"
mkdir -p "$STARCCM_TMP"

slurm_hl2hl.py --format STAR-CCM+ > machinefile

NCORE=$((SLURM_NTASKS * SLURM_CPUS_PER_TASK))

starccm+ -power -np $NCORE -podkey $LM_PROJECT -licpath $CDLMD_LICENSE_FILE -machinefile $SLURM_SUBMIT_DIR/machinefile -mpi intel -batch /path/to/your/simulation/file

File : starccm_job.sh

#!/bin/bash
#SBATCH --account=def-group   # specify some account
#SBATCH --time=00-01:00       # Time limit: dd-hh:mm
#SBATCH --nodes=2             # Specify 1 or more nodes
#SBATCH --cpus-per-task=48    # or 32 for smaller full nodes
#SBATCH --mem=0               # Request all memory per node
#SBATCH --ntasks-per-node=1   # Do not change this value

# Pick an appropriate STARCCM module/version and precision; 
# module load starccm/12.04.011-R8
module load starccm-mixed/14.06.013

export LM_PROJECT='YOUR CD-ADAPCO PROJECT ID GOES HERE'
export CDLMD_LICENSE_FILE="1999@flex.cd-adapco.com"

export STARCCM_TMP="${SCRATCH}/.starccm-${EBVERSIONSTARCCM}"
mkdir -p "$STARCCM_TMP"

slurm_hl2hl.py --format STAR-CCM+ > machinefile

NCORE=$((SLURM_NTASKS * SLURM_CPUS_PER_TASK))

starccm+ -power -np $NCORE -podkey $LM_PROJECT -licpath $CDLMD_LICENSE_FILE -machinefile `pwd`/machinefile -mpi intel -batch `pwd`/your-simulation-file.sim

File : starccm_job.sh

#!/bin/bash
#SBATCH --time=00-01:00       # Time limit: dd-hh:mm
#SBATCH --nodes=2             # Specify 1 or more nodes
#SBATCH --cpus-per-task=40    # or 80 to use HyperThreading
#SBATCH --ntasks-per-node=1   # Do not change this value

cd $SLURM_SUBMIT_DIR

module purge --force
module load CCEnv
module load StdEnv
module load starccm/14.06.013-R8

export LM_PROJECT='YOUR CD-ADAPCO PROJECT ON DEMAND KEY GOES HERE'
export CDLMD_LICENSE_FILE="1999@localhost"
ssh nia-gw -L 1999:flex.cd-adapco.com:1999 -L 2099:flex.cd-adapco.com:2099 -N -f

export STARCCM_TMP="${SCRATCH}/.starccm-${EBVERSIONSTARCCM}"
mkdir -p "$STARCCM_TMP"

# ln -s $STARCCM_TMP $HOME  ### only the first time you run the script

slurm_hl2hl.py --format STAR-CCM+ > machinefile

NCORE=$((SLURM_NTASKS * SLURM_CPUS_PER_TASK))

starccm+ -power -np $NCORE -podkey $LM_PROJECT -licpath $CDLMD_LICENSE_FILE -machinefile $SLURM_SUBMIT_DIR/machinefile -batch /path/to/your/simulation/file

Remote visualization

To prepare your account for remote visualization, first specify your license details:

• Setup your ~/.licenses/starccm.lic license file as described above
  
• PodKey users should also specify:

  export LM_PROJECT='CD-ADAPCO PROJECT ID'

Cluster nodes

1. Connect to a cluster compute or login node with TigerVNC
2. module load starccm-mixed/X.Y.Z **OR** starccm/X.Y.Z-R8

   starccm+ -mesa -np 4 input-file.sim

The following module versions are broken for interactive use in graphics mode on cluster compute nodes: starccm-mixed/11.06.011, starccm/11.06.011-R8, starccm-mixed/12.04.011, starccm/12.04.011-R8, starccm-mixed/12.06.011, starccm-mixed/13.06.012 and starccm/13.06.012-R8. Please use one of the other module versions instead. Once they are fixed this message will be removed.

VDI nodes

o Using global Compute Canada cluster modules:

1. Connect to gra-vdi with TigerVNC
2. module load CcEnv StdEnv
3. module avail starccm
4. module load starccm-mixed/14.X.Y **OR** starccm/14.X.Y-R8

   starccm+ -clientldpreload /usr/lib64/VirtualGL/libvglfaker.so -np 4 input-file.sim

5. module load starccm-mixed/11.X.Y|12.X.Y|13.X.Y **OR** starccm/11.X.Y-R8|12.X.Y-R8|13.X.Y-R8)

   starccm+ -mesa -np 4 input-file.sim

o Using local gra-vdi modules (may provide better graphics performance):

1. Connect to gra-vdi with TigerVNC
2. export CDLMD_LICENSE_FILE=~/.licenses/starccm.lic
3. module load SnEnv
4. module load starccm/mixed/14.04.013 **OR** starccm/r8/14.04.013

   starccm+ -np 4 input-file.sim

Message Passing Interface