Nextflow: Difference between revisions

From Alliance Doc
Jump to navigation Jump to search
No edit summary
(Users not familiar with nextflow should know that nextflow's test profile is for test dataset.)
 
(49 intermediate revisions by 9 users not shown)
Line 20: Line 20:
Start by installing a pip package to help with the setup; please note that the nf-core tools can be slow to install.
Start by installing a pip package to help with the setup; please note that the nf-core tools can be slow to install.
<source lang="bash">
<source lang="bash">
module purge # we make sure that some previously loaded package are not polluting the installation  
module purge # Make sure that previously loaded modules are not polluting the installation  
module load python/3.8
module load python/3.11
module load rust # New nf-core installations will err out if rust hasn't been loaded
module load postgresql # Will not use PostgresSQL here, but some Python modules which list psycopg2 as a dependency in the installation would crash without it.
python -m venv nf-core-env
python -m venv nf-core-env
source nf-core-env/bin/activate
source nf-core-env/bin/activate
python -m pip install nf_core  
python -m pip install nf_core==2.13
</source>
</source>


<!--T:7-->
<!--T:7-->
Set the name of the pipeline to be tested, and load Nextflow and Apptainer (the new name of the Singularity container utility). Nexflow integrates well with Apptainer/Singularity.  
Set the name of the pipeline to be tested, and load Nextflow and [[Apptainer]] (the successor to the [[Singularity]] container utility). Nextflow integrates well with Apptainer.  
</translate>
</translate>
<source lang="bash">
<source lang="bash">
export NFCORE_PL=smrnaseq
export NFCORE_PL=smrnaseq
export PL_VERSION=1.1.0
export PL_VERSION=2.3.1
module load nextflow/22.04.3
module load nextflow/23
module load apptainer/1.1.3
module load apptainer/1
</source>
</source>
<translate>
<translate>
<!--T:8-->
<!--T:8-->
An important step is to download all the Singularity images that will be used to run the pipeline at the same time we download the workflow itself. If this isn't done, Nexflow will try to download the images from the compute nodes, just before steps are executed. This would not work on most of our clusters since there is no Internet connection on the compute nodes.
An important step is to download all the Apptainer images that will be used to run the pipeline at the same time we download the workflow itself. If this isn't done, Nextflow will try to download the images from the compute nodes, just before steps are executed. This would not work on most of our clusters since there is no internet connection on the compute nodes.


<!--T:9-->
<!--T:9-->
We create a folder where Singularity images will be stored and set the environment variable <code>NXF_SINGULARITY_CACHEDIR</code> to it. Workflow images tend to be big, so do not store them in your $HOME space because it has a small quota; prefer a spot on the /project space instead.   
Create a folder where images will be stored and set the environment variable <code>NXF_SINGULARITY_CACHEDIR</code> to it. Workflow images tend to be big, so do not store them in your $HOME space because it has a small quota. Instead, store them in <code>/project</code> space.   
<source lang="bash">
<source lang="bash">
mkdir /project/<def-group>/NFX_SINGULARITY_CACHEDIR
mkdir /project/<def-group>/NXF_SINGULARITY_CACHEDIR
export NXF_SINGULARITY_CACHEDIR=/project/<def-group>/NFX_SINGULARITY_CACHEDIR
export NXF_SINGULARITY_CACHEDIR=/project/<def-group>/NXF_SINGULARITY_CACHEDIR
</source>
</source>


<!--T:10-->
<!--T:10-->
You can add the export line to your <code>.bashrc</code>, as a convenience. You should also share that folder with other members of your group that are planning to use Nextflow with Singularity.  
You should share this folder with other members of your group who are planning to use Nextflow with Apptainer, in order to reduce duplication.
Also, you may add the <code>export</code> command to your <code>~/.bashrc</code> as a convenience.


<!--T:11-->
<!--T:11-->
The following command will download the <code>smrnaseq</code> pipeline to your /scratch directory and put all the Apptainer/Singularity containers in the cache directory  
The following command downloads the <code>smrnaseq</code> pipeline to your <code>/scratch</code> directory and puts all the images in the cache directory.


<!--T:12-->
<!--T:12-->
<source lang="bash">
<source lang="bash">
cd ~/scratch
cd ~/scratch
nf-core download --singularity-cache-only --container singularity --compress none -r ${PL_VERSION}  -p 6  ${NFCORE_PL}
nf-core download   --container-cache-utilisation amend --container-system  singularity   --compress none -r ${PL_VERSION}  -p 6  ${NFCORE_PL}
# Alteratively, you can run the download tool in interactive mode
nf-core download
# Here is what your Singularity image cache will look like after completion:
ls  $NXF_SINGULARITY_CACHEDIR/
depot.galaxyproject.org-singularity-bioconvert-1.1.1--pyhdfd78af_0.img
depot.galaxyproject.org-singularity-blat-36--0.img
depot.galaxyproject.org-singularity-bowtie-1.3.1--py310h7b97f60_6.img
depot.galaxyproject.org-singularity-bowtie2-2.4.5--py39hd2f7db1_2.img
depot.galaxyproject.org-singularity-fastp-0.23.4--h5f740d0_0.img
depot.galaxyproject.org-singularity-fastqc-0.12.1--hdfd78af_0.img
depot.galaxyproject.org-singularity-fastx_toolkit-0.0.14--hdbdd923_11.img
depot.galaxyproject.org-singularity-mirdeep2-2.0.1.3--hdfd78af_1.img
depot.galaxyproject.org-singularity-mirtrace-1.0.1--hdfd78af_1.img
depot.galaxyproject.org-singularity-mulled-v2-0c13ef770dd7cc5c76c2ce23ba6669234cf03385-63be019f50581cc5dfe4fc0f73ae50f2d4d661f7-0.img
depot.galaxyproject.org-singularity-mulled-v2-419bd7f10b2b902489ac63bbaafc7db76f8e0ae1-f5ff7de321749bc7ae12f7e79a4b581497f4c8ce-0.img
depot.galaxyproject.org-singularity-mulled-v2-ffbf83a6b0ab6ec567a336cf349b80637135bca3-40128b496751b037e2bd85f6789e83d4ff8a4837-0.img
depot.galaxyproject.org-singularity-multiqc-1.21--pyhdfd78af_0.img
depot.galaxyproject.org-singularity-pigz-2.3.4.img
depot.galaxyproject.org-singularity-r-data.table-1.12.2.img
depot.galaxyproject.org-singularity-samtools-1.19.2--h50ea8bc_0.img
depot.galaxyproject.org-singularity-seqcluster-1.2.9--pyh5e36f6f_0.img
depot.galaxyproject.org-singularity-seqkit-2.6.1--h9ee0642_0.img
depot.galaxyproject.org-singularity-ubuntu-20.04.img
depot.galaxyproject.org-singularity-umicollapse-1.0.0--hdfd78af_1.img
depot.galaxyproject.org-singularity-umi_tools-1.1.5--py39hf95cd2a_0.img
quay.io-singularity-bioconvert-1.1.1--pyhdfd78af_0.img
quay.io-singularity-blat-36--0.img
quay.io-singularity-bowtie-1.3.1--py310h7b97f60_6.img
quay.io-singularity-bowtie2-2.4.5--py39hd2f7db1_2.img
quay.io-singularity-fastp-0.23.4--h5f740d0_0.img
quay.io-singularity-fastqc-0.12.1--hdfd78af_0.img
quay.io-singularity-fastx_toolkit-0.0.14--hdbdd923_11.img
quay.io-singularity-mirdeep2-2.0.1.3--hdfd78af_1.img
quay.io-singularity-mirtrace-1.0.1--hdfd78af_1.img
quay.io-singularity-mulled-v2-0c13ef770dd7cc5c76c2ce23ba6669234cf03385-63be019f50581cc5dfe4fc0f73ae50f2d4d661f7-0.img
quay.io-singularity-mulled-v2-419bd7f10b2b902489ac63bbaafc7db76f8e0ae1-f5ff7de321749bc7ae12f7e79a4b581497f4c8ce-0.img
quay.io-singularity-mulled-v2-ffbf83a6b0ab6ec567a336cf349b80637135bca3-40128b496751b037e2bd85f6789e83d4ff8a4837-0.img
quay.io-singularity-multiqc-1.21--pyhdfd78af_0.img
quay.io-singularity-pigz-2.3.4.img
quay.io-singularity-r-data.table-1.12.2.img
quay.io-singularity-samtools-1.19.2--h50ea8bc_0.img
quay.io-singularity-seqcluster-1.2.9--pyh5e36f6f_0.img
quay.io-singularity-seqkit-2.6.1--h9ee0642_0.img
quay.io-singularity-ubuntu-20.04.img
quay.io-singularity-umicollapse-1.0.0--hdfd78af_1.img
quay.io-singularity-umi_tools-1.1.5--py39hf95cd2a_0.img
singularity-bioconvert-1.1.1--pyhdfd78af_0.img
singularity-blat-36--0.img
singularity-bowtie-1.3.1--py310h7b97f60_6.img
singularity-bowtie2-2.4.5--py39hd2f7db1_2.img
singularity-fastp-0.23.4--h5f740d0_0.img
singularity-fastqc-0.12.1--hdfd78af_0.img
singularity-fastx_toolkit-0.0.14--hdbdd923_11.img
singularity-mirdeep2-2.0.1.3--hdfd78af_1.img
singularity-mirtrace-1.0.1--hdfd78af_1.img
singularity-mulled-v2-0c13ef770dd7cc5c76c2ce23ba6669234cf03385-63be019f50581cc5dfe4fc0f73ae50f2d4d661f7-0.img
singularity-mulled-v2-419bd7f10b2b902489ac63bbaafc7db76f8e0ae1-f5ff7de321749bc7ae12f7e79a4b581497f4c8ce-0.img
singularity-mulled-v2-ffbf83a6b0ab6ec567a336cf349b80637135bca3-40128b496751b037e2bd85f6789e83d4ff8a4837-0.img
singularity-multiqc-1.21--pyhdfd78af_0.img
singularity-pigz-2.3.4.img
singularity-r-data.table-1.12.2.img
singularity-samtools-1.19.2--h50ea8bc_0.img
singularity-seqcluster-1.2.9--pyh5e36f6f_0.img
singularity-seqkit-2.6.1--h9ee0642_0.img
singularity-ubuntu-20.04.img
singularity-umicollapse-1.0.0--hdfd78af_1.img
singularity-umi_tools-1.1.5--py39hf95cd2a_0.img
</source>
</source>


<!--T:13-->
<!--T:13-->
This workflow will download 18 containers for a total of about 4Go. It also creates an <code>nf-core-${NFCORE_PL}-${PL_VERSION}</code> folder with the <code>workflow</code> and <code>config</code> subfolders. The <code>config</code> subfolder includes the [https://github.com/nf-core/configs institutional configuration] while the workflow itself is in the <code>workflow</code> subfolder.
This workflow downloads 18 containers for a total of about 4Go and creates an <code>nf-core-${NFCORE_PL}_${PL_VERSION}</code> folder with the version number <code>X_X_X</code> and <code>config</code> subfolders. The <code>config</code> subfolder includes the [https://github.com/nf-core/configs institutional configuration] while the workflow itself is in the other subfolder.


<!--T:14-->
<!--T:14-->
This is what a typical nf-core pipeline looks like:
This is what a typical nf-core pipeline looks like:
<source lang="bash">
<source lang="bash">
$ ls nf-core-${NFCORE_PL}-${PL_VERSION}/workflow
ls nf-core-${NFCORE_PL}_${PL_VERSION}/2_3_1
assets bin  CHANGELOG.md  CODE_OF_CONDUCT.md  conf Dockerfile  docs  environment.yml  lib  LICENSE  main.nf  nextflow.config nextflow_schema.json README.md
assets       CITATIONS.md       docs    modules          nextflow_schema.json subworkflows
bin          CODE_OF_CONDUCT.md  LICENSE modules.json    pyproject.toml        tower.yml
CHANGELOG.md conf                main.nf  nextflow.config  README.md             workflows
</source>
</source>


<!--T:15-->
<!--T:15-->
Once we are ready to launch the pipeline, Nextflow will look at the <code>nextflow.config</code> file and also at the <code>~/.nextflow/config</code> files (if it exists) to control how to run the workflow. The nf-core pipelines all have a default config, a test config, and container configs (singularity, podman, etc). We will also need a custom config for the cluster (Narval, Béluga, Cedar or Graham) you are running on. Nextflow pipelines could also run on Niagara if they where designed with that specific cluster in mind, but we would generally discourage you to try running nf-core or any other generic Nextflow pipeline there.
When the pipeline is launched, Nextflow will look at the <code>nextflow.config</code> file in that folder and also at the <code>~/.nextflow/config</code> file (if it exists) in your home to control how to run the workflow. The nf-core pipelines all have a default configuration, a test configuration, and container configurations (singularity, podman, etc). You will need to provide a custom configuration for the cluster you are running on (Narval, Béluga, Cedar or Graham), a simple configuration is provided in next section. Nextflow pipelines could also run on [[Niagara]] if they were designed with that specific cluster in mind, but we generally discourage you to run nf-core or any other generic Nextflow pipeline on Niagara.


==== A config for our clusters ==== <!--T:16-->
==== A configuration for our clusters ==== <!--T:16-->


<!--T:17-->
<!--T:17-->
You can use the following config by changing the default value for nf-core processes and enter the correct information for the [[Béluga]] and [[Narval]] clusters. This config is saved in a profile block that we will load at runtime.  
You can use the following config by changing the default value for nf-core processes and enter the correct information for the [[Béluga/en|Béluga]] and [[Narval/en|Narval]] clusters. This config is saved in a profile block that will be loaded at runtime.  
</translate>
</translate>
{{File
{{File
Line 81: Line 153:
   |lang="config"
   |lang="config"
   |contents=
   |contents=
params {
    config_profile_description = 'Alliance HPC config'
    config_profile_contact = 'support@alliancecan.ca'
    config_profile_url = 'docs.alliancecan.ca/mediawiki/index.php?title=Nextflow'
}
singularity {
  enabled = true
  autoMounts = true
}
apptainer {
  autoMounts = true
}
process {
process {
   executor = 'slurm'  
   executor = 'slurm'  
  pollInterval = '60 sec'
   clusterOptions = '--account=<my-account>'
   clusterOptions = '--account=<my-account>'
  submitRateLimit = '60/1min'
  queueSize = 100
  errorStrategy = 'retry'
   maxRetries = 1
   maxRetries = 1
   errorStrategy = { task.exitStatus in [125,139] ? 'retry' : 'finish' }
   errorStrategy = { task.exitStatus in [125,139] ? 'retry' : 'finish' }
Line 93: Line 178:
   cpu = 1   
   cpu = 1   
   time = '3h'  
   time = '3h'  
}
executor {
  pollInterval = '60 sec'
  submitRateLimit = '60/1min'
  queueSize = 100
}
}


profiles {
profiles {
   beluga{
   beluga {
     max_memory='186G'
     max_memory='186G'
     max_cpu=40
     max_cpu=40
     max_time='168h'
     max_time='168h'
   }
   }
   narval{
   narval {
     max_memory='249G'
     max_memory='249G'
     max_cpu=64
     max_cpu=64
Line 111: Line 202:
<!--T:18-->
<!--T:18-->
Replace <code><my-account></code> with your own account, which looks like <code>def-pname</code>.
Replace <code><my-account></code> with your own account, which looks like <code>def-pname</code>.
The <code>singularity.autoMounts = true</code> bits ensure that all the cluster File Systems (<code>/project</code>, <code>/scratch</code>, <code>/home</code> & <code>/localscratch</code>)  will be properly mounted inside the singularity container.


<!--T:19-->
<!--T:19-->
This configuration ensures that there are no more than 100 jobs in the Slurm queue and that it only submits 60 jobs per minute. It indicates that Béluga machines have 40 cores and 186G of RAM with a maximum walltime of one week (168 hours).
This configuration ensures that there are no more than 100 jobs in the Slurm queue and that only 60 jobs are submitted per minute. It indicates that Béluga machines have 40 cores and 186G of RAM with a maximum walltime of one week (168 hours).


<!--T:20-->
<!--T:20-->
That config is linked to the system you are running on, but it is also related to the pipeline itself. For example, here cpu = 1 is the default value, but steps in the pipeline can have more than that. This can get quite complicated and labels in the <code>workflow/config/base.config</code> file are used to identify a step with a specific configuration, which is not covered in this page.
The config is linked to the system you are running on, but it is also related to the pipeline itself. For example, here cpu = 1 is the default value, but steps in the pipeline can have more than that. This can get quite complicated and labels in the <code>nf-core-smrnaseq_2.3.1/2_3_1/conf/base.config</code> file are used internally by the pipeline to identify a step with a non default configuration. We do not cover this more advanced topic here, but note that tweaking these labels could make a big difference in the queuing and execution time of your pipeline.


<!--T:21-->
<!--T:21-->
What we do here is implementing a default restart behavior that will add some memory automatically on fail steps that have ret code 125 (out of memory) or 139 (omm killed because the process used more memory that what was allowed by cgroup).
If the jobs fail with return codes 125 (<i>out of memory</i>) or 139 (<i>omm killed because the process used more memory than what was allowed by cgroup</i>), the lines <code>process.errorStrategy</code> and <code>process.memory</code> in the configuration make sure that they are automatically restarted with an additional 4GB of RAM.  


====Running the pipeline==== <!--T:22-->
====Running the pipeline==== <!--T:22-->


<!--T:23-->
<!--T:23-->
We will use the two profiles provided by nf-core, test, and singularity and the profile one we have just created for Béluga. Note that Nextflow is mainly written in JAVA and that JAVA tends to use a lot of virtual memory. On the Narval cluster that won't be a problem, but on Beluga login node you will need to change the virtual memory to run most workflows, you can set the virtual memory limit to 40G with this command <code>ulimit -v 40000000</code>. We also used a [[Prolonging_terminal_sessions#Terminal_multiplexers|terminal multiplexer]], so if we are disconnected the Nextflow pipeline will still run, and you will be able to reconnect to the controller process. Note that running Nextflow on login nodes is easy on Beluga and Naval, but not on Graham and Cedar since the login node virtual memory limit cannot be changed on these clusters; for them, we recommend launching Nextflow from a compute node, where the virtual memory is never limited.   
Use the two profiles provided by nf-core (<i>test</i> for nextflow's test dataset and <i>singularity</i> for the container platform) and the profile we have just created for Béluga. Note that Nextflow is mainly written in Java which tends to use a lot of virtual memory. On the Narval cluster that won't be a problem, but with the Béluga login node, you will need to change the virtual memory to run most workflows. To set the virtual memory limit to 40G, use the <code>ulimit -v 40000000</code> command. We also used a [[Prolonging_terminal_sessions#Terminal_multiplexers|terminal multiplexer]], so the Nextflow pipeline will still run if you are disconnected and you will be able to reconnect to the controller process. Note that running Nextflow on login nodes is easy on Béluga and Narval, but harder on Graham and Cedar since the login node virtual memory limit cannot be changed on these clusters; we recommend launching Nextflow from a compute node, where the virtual memory is never limited.   
<source lang="bash">
<source lang="bash">
nextflow run nf-core-${NFCORE_PL}-${PL_VERSION}/workflow -profile test,singularity,beluga --outdir ${NFCORE_PL}_OUTPUT
nextflow run nf-core-${NFCORE_PL}_${PL_VERSION}/2_3_1/  -profile test,singularity,narval --outdir ${NFCORE_PL}_OUTPUT
</source>
</source>
So now you have started the Nexflow sub scheduler on the login node. This process sends jobs to SLURM when they are ready to be processed.
Be careful if you have an AWS configuration in your <code>~/.aws</code> directory, as Nextflow might complain that it can't dowload the pipeline test dataset with your default id.
 
<!--T:27-->
So now you have started Nextflow on the login node. This process sends jobs to Slurm when they are ready to be processed.  


<!--T:24-->
<!--T:24-->
You see the progression of the pipeline right there, you can also open a new session on the cluster or detach from the tmux session to have a look at the jobs in the SLURM queue with <code>squeue -u $USER</code>
You can see the progression of the pipeline. You can also open a new session on the cluster or detach from the tmux session to have a look at the jobs in the Slurm queue with <code>squeue -u $USER</code> or <code>sq</code>
 
==== Known issues ==== <!--T:25-->
 
<!--T:26-->
Some users have reported getting a <code>SIGBUS</code> error from the Nextflow main process.
We suspect this is connected with these Nextflow issues:
* https://github.com/nextflow-io/nextflow/issues/842
* https://github.com/nextflow-io/nextflow/issues/2774
Setting the environment variable <code>NXF_OPTS="-Dleveldb.mmap=false"</code> when executing <code>nextflow</code> is reported to solve the problem.
 
</translate>
</translate>
[[Category:Software]]
[[Category:Software]]

Latest revision as of 14:23, 30 September 2024

Other languages:

Nextflow is software for running reproducible scientific workflows. The term Nextflow is used to describe both the domain-specific-language (DSL) the pipelines are written in, and the software used to interpret those workflows.


Usage

On our systems, Nextflow is provided as a module you can load with module load nextflow.

While you can build your own workflow, you can also rely on the published nf-core pipelines. We will describe here a simple configuration that will let you run nf-core pipelines on our systems and help you to configure Nextflow properly for your own pipelines.

Our example uses the nf-core/smrnaseq pipeline.

Installation

The following procedure is to be run on a login node.

Start by installing a pip package to help with the setup; please note that the nf-core tools can be slow to install. 

module purge # Make sure that previously loaded modules are not polluting the installation 
module load python/3.11
module load rust # New nf-core installations will err out if rust hasn't been loaded
module load postgresql # Will not use PostgresSQL here, but some Python modules which list psycopg2 as a dependency in the installation would crash without it.
python -m venv nf-core-env
source nf-core-env/bin/activate
python -m pip install nf_core==2.13

Set the name of the pipeline to be tested, and load Nextflow and Apptainer (the successor to the Singularity container utility). Nextflow integrates well with Apptainer. 

export NFCORE_PL=smrnaseq
export PL_VERSION=2.3.1
module load nextflow/23
module load apptainer/1

An important step is to download all the Apptainer images that will be used to run the pipeline at the same time we download the workflow itself. If this isn't done, Nextflow will try to download the images from the compute nodes, just before steps are executed. This would not work on most of our clusters since there is no internet connection on the compute nodes.

Create a folder where images will be stored and set the environment variable NXF_SINGULARITY_CACHEDIR to it. Workflow images tend to be big, so do not store them in your $HOME space because it has a small quota. Instead, store them in /project space. 

mkdir /project/<def-group>/NXF_SINGULARITY_CACHEDIR
export NXF_SINGULARITY_CACHEDIR=/project/<def-group>/NXF_SINGULARITY_CACHEDIR

You should share this folder with other members of your group who are planning to use Nextflow with Apptainer, in order to reduce duplication. Also, you may add the export command to your ~/.bashrc as a convenience.

The following command downloads the smrnaseq pipeline to your /scratch directory and puts all the images in the cache directory. 

cd ~/scratch
nf-core download   --container-cache-utilisation amend --container-system  singularity   --compress none -r ${PL_VERSION}  -p 6  ${NFCORE_PL}
# Alteratively, you can run the download tool in interactive mode
nf-core download
# Here is what your Singularity image cache will look like after completion:
ls  $NXF_SINGULARITY_CACHEDIR/
depot.galaxyproject.org-singularity-bioconvert-1.1.1--pyhdfd78af_0.img
depot.galaxyproject.org-singularity-blat-36--0.img
depot.galaxyproject.org-singularity-bowtie-1.3.1--py310h7b97f60_6.img
depot.galaxyproject.org-singularity-bowtie2-2.4.5--py39hd2f7db1_2.img
depot.galaxyproject.org-singularity-fastp-0.23.4--h5f740d0_0.img
depot.galaxyproject.org-singularity-fastqc-0.12.1--hdfd78af_0.img
depot.galaxyproject.org-singularity-fastx_toolkit-0.0.14--hdbdd923_11.img
depot.galaxyproject.org-singularity-mirdeep2-2.0.1.3--hdfd78af_1.img
depot.galaxyproject.org-singularity-mirtrace-1.0.1--hdfd78af_1.img
depot.galaxyproject.org-singularity-mulled-v2-0c13ef770dd7cc5c76c2ce23ba6669234cf03385-63be019f50581cc5dfe4fc0f73ae50f2d4d661f7-0.img
depot.galaxyproject.org-singularity-mulled-v2-419bd7f10b2b902489ac63bbaafc7db76f8e0ae1-f5ff7de321749bc7ae12f7e79a4b581497f4c8ce-0.img
depot.galaxyproject.org-singularity-mulled-v2-ffbf83a6b0ab6ec567a336cf349b80637135bca3-40128b496751b037e2bd85f6789e83d4ff8a4837-0.img
depot.galaxyproject.org-singularity-multiqc-1.21--pyhdfd78af_0.img
depot.galaxyproject.org-singularity-pigz-2.3.4.img
depot.galaxyproject.org-singularity-r-data.table-1.12.2.img
depot.galaxyproject.org-singularity-samtools-1.19.2--h50ea8bc_0.img
depot.galaxyproject.org-singularity-seqcluster-1.2.9--pyh5e36f6f_0.img
depot.galaxyproject.org-singularity-seqkit-2.6.1--h9ee0642_0.img
depot.galaxyproject.org-singularity-ubuntu-20.04.img
depot.galaxyproject.org-singularity-umicollapse-1.0.0--hdfd78af_1.img
depot.galaxyproject.org-singularity-umi_tools-1.1.5--py39hf95cd2a_0.img
quay.io-singularity-bioconvert-1.1.1--pyhdfd78af_0.img
quay.io-singularity-blat-36--0.img
quay.io-singularity-bowtie-1.3.1--py310h7b97f60_6.img
quay.io-singularity-bowtie2-2.4.5--py39hd2f7db1_2.img
quay.io-singularity-fastp-0.23.4--h5f740d0_0.img
quay.io-singularity-fastqc-0.12.1--hdfd78af_0.img
quay.io-singularity-fastx_toolkit-0.0.14--hdbdd923_11.img
quay.io-singularity-mirdeep2-2.0.1.3--hdfd78af_1.img
quay.io-singularity-mirtrace-1.0.1--hdfd78af_1.img
quay.io-singularity-mulled-v2-0c13ef770dd7cc5c76c2ce23ba6669234cf03385-63be019f50581cc5dfe4fc0f73ae50f2d4d661f7-0.img
quay.io-singularity-mulled-v2-419bd7f10b2b902489ac63bbaafc7db76f8e0ae1-f5ff7de321749bc7ae12f7e79a4b581497f4c8ce-0.img
quay.io-singularity-mulled-v2-ffbf83a6b0ab6ec567a336cf349b80637135bca3-40128b496751b037e2bd85f6789e83d4ff8a4837-0.img
quay.io-singularity-multiqc-1.21--pyhdfd78af_0.img
quay.io-singularity-pigz-2.3.4.img
quay.io-singularity-r-data.table-1.12.2.img
quay.io-singularity-samtools-1.19.2--h50ea8bc_0.img
quay.io-singularity-seqcluster-1.2.9--pyh5e36f6f_0.img
quay.io-singularity-seqkit-2.6.1--h9ee0642_0.img
quay.io-singularity-ubuntu-20.04.img
quay.io-singularity-umicollapse-1.0.0--hdfd78af_1.img
quay.io-singularity-umi_tools-1.1.5--py39hf95cd2a_0.img
singularity-bioconvert-1.1.1--pyhdfd78af_0.img
singularity-blat-36--0.img
singularity-bowtie-1.3.1--py310h7b97f60_6.img
singularity-bowtie2-2.4.5--py39hd2f7db1_2.img
singularity-fastp-0.23.4--h5f740d0_0.img
singularity-fastqc-0.12.1--hdfd78af_0.img
singularity-fastx_toolkit-0.0.14--hdbdd923_11.img
singularity-mirdeep2-2.0.1.3--hdfd78af_1.img
singularity-mirtrace-1.0.1--hdfd78af_1.img
singularity-mulled-v2-0c13ef770dd7cc5c76c2ce23ba6669234cf03385-63be019f50581cc5dfe4fc0f73ae50f2d4d661f7-0.img
singularity-mulled-v2-419bd7f10b2b902489ac63bbaafc7db76f8e0ae1-f5ff7de321749bc7ae12f7e79a4b581497f4c8ce-0.img
singularity-mulled-v2-ffbf83a6b0ab6ec567a336cf349b80637135bca3-40128b496751b037e2bd85f6789e83d4ff8a4837-0.img
singularity-multiqc-1.21--pyhdfd78af_0.img
singularity-pigz-2.3.4.img
singularity-r-data.table-1.12.2.img
singularity-samtools-1.19.2--h50ea8bc_0.img
singularity-seqcluster-1.2.9--pyh5e36f6f_0.img
singularity-seqkit-2.6.1--h9ee0642_0.img
singularity-ubuntu-20.04.img
singularity-umicollapse-1.0.0--hdfd78af_1.img
singularity-umi_tools-1.1.5--py39hf95cd2a_0.img

This workflow downloads 18 containers for a total of about 4Go and creates an nf-core-${NFCORE_PL}_${PL_VERSION} folder with the version number X_X_X and config subfolders. The config subfolder includes the institutional configuration while the workflow itself is in the other subfolder.

This is what a typical nf-core pipeline looks like: 

ls nf-core-${NFCORE_PL}_${PL_VERSION}/2_3_1
assets        CITATIONS.md        docs     modules          nextflow_schema.json  subworkflows
bin           CODE_OF_CONDUCT.md  LICENSE  modules.json     pyproject.toml        tower.yml
CHANGELOG.md  conf                main.nf  nextflow.config  README.md             workflows

When the pipeline is launched, Nextflow will look at the nextflow.config file in that folder and also at the ~/.nextflow/config file (if it exists) in your home to control how to run the workflow. The nf-core pipelines all have a default configuration, a test configuration, and container configurations (singularity, podman, etc). You will need to provide a custom configuration for the cluster you are running on (Narval, Béluga, Cedar or Graham), a simple configuration is provided in next section. Nextflow pipelines could also run on Niagara if they were designed with that specific cluster in mind, but we generally discourage you to run nf-core or any other generic Nextflow pipeline on Niagara.

A configuration for our clusters

You can use the following config by changing the default value for nf-core processes and enter the correct information for the Béluga and Narval clusters. This config is saved in a profile block that will be loaded at runtime.

File : ~/.nextflow/config

params {
    config_profile_description = 'Alliance HPC config'
    config_profile_contact = 'support@alliancecan.ca'
    config_profile_url = 'docs.alliancecan.ca/mediawiki/index.php?title=Nextflow'
}


singularity {
  enabled = true
  autoMounts = true
}

apptainer {
  autoMounts = true
}

process {
  executor = 'slurm' 
  clusterOptions = '--account=<my-account>'
  maxRetries = 1
  errorStrategy = { task.exitStatus in [125,139] ? 'retry' : 'finish' }
  memory = { check_max( 4.GB * task.attempt, 'memory' ) }
  cpu = 1  
  time = '3h' 
}

executor {
  pollInterval = '60 sec'
  submitRateLimit = '60/1min'
  queueSize = 100 
}

profiles {
  beluga {
    max_memory='186G'
    max_cpu=40
    max_time='168h'
  }
  narval {
    max_memory='249G'
    max_cpu=64
    max_time='168h'
  }
}


Replace <my-account> with your own account, which looks like def-pname. The singularity.autoMounts = true bits ensure that all the cluster File Systems (/project, /scratch, /home & /localscratch) will be properly mounted inside the singularity container.

This configuration ensures that there are no more than 100 jobs in the Slurm queue and that only 60 jobs are submitted per minute. It indicates that Béluga machines have 40 cores and 186G of RAM with a maximum walltime of one week (168 hours).

The config is linked to the system you are running on, but it is also related to the pipeline itself. For example, here cpu = 1 is the default value, but steps in the pipeline can have more than that. This can get quite complicated and labels in the nf-core-smrnaseq_2.3.1/2_3_1/conf/base.config file are used internally by the pipeline to identify a step with a non default configuration. We do not cover this more advanced topic here, but note that tweaking these labels could make a big difference in the queuing and execution time of your pipeline.

If the jobs fail with return codes 125 (out of memory) or 139 (omm killed because the process used more memory than what was allowed by cgroup), the lines process.errorStrategy and process.memory in the configuration make sure that they are automatically restarted with an additional 4GB of RAM.

Running the pipeline

Use the two profiles provided by nf-core (test for nextflow's test dataset and singularity for the container platform) and the profile we have just created for Béluga. Note that Nextflow is mainly written in Java which tends to use a lot of virtual memory. On the Narval cluster that won't be a problem, but with the Béluga login node, you will need to change the virtual memory to run most workflows. To set the virtual memory limit to 40G, use the ulimit -v 40000000 command. We also used a terminal multiplexer, so the Nextflow pipeline will still run if you are disconnected and you will be able to reconnect to the controller process. Note that running Nextflow on login nodes is easy on Béluga and Narval, but harder on Graham and Cedar since the login node virtual memory limit cannot be changed on these clusters; we recommend launching Nextflow from a compute node, where the virtual memory is never limited. 

nextflow run nf-core-${NFCORE_PL}_${PL_VERSION}/2_3_1/  -profile test,singularity,narval  --outdir ${NFCORE_PL}_OUTPUT

Be careful if you have an AWS configuration in your ~/.aws directory, as Nextflow might complain that it can't dowload the pipeline test dataset with your default id.

So now you have started Nextflow on the login node. This process sends jobs to Slurm when they are ready to be processed.

You can see the progression of the pipeline. You can also open a new session on the cluster or detach from the tmux session to have a look at the jobs in the Slurm queue with squeue -u $USER or sq

Known issues

Some users have reported getting a SIGBUS error from the Nextflow main process. We suspect this is connected with these Nextflow issues: 

* https://github.com/nextflow-io/nextflow/issues/842
* https://github.com/nextflow-io/nextflow/issues/2774

Setting the environment variable NXF_OPTS="-Dleveldb.mmap=false" when executing nextflow is reported to solve the problem.

Retrieved from "https://docs.alliancecan.ca/mediawiki/index.php?title=Nextflow&oldid=161291"