Materials Studio

From Alliance Doc
Jump to navigation Jump to search
Other languages:

The Alliance does not have permission to install Materials Studio centrally on all clusters. If you have a license, follow these instructions to install the application in your account. Please note that the current instructions are only valid for older standard software environments, so before beginning you will need to use a command like module load StdEnv/2016.4 if you are using the default 2020 standard software environment.


Installing Materials Studio 2020

Note

These instructions have been tested with Materials Studio 2020.


If you have access to Materials Studio 2020, you will need two things to proceed. First, you must have the archive file that contains the installer; this file should be named BIOVIA_2020.MaterialsStudio2020.tar. Second, you must have the IP address (or DNS name) and the port of an already configured license server to which you will connect.

Once you have these, upload the BIOVIA_2020.MaterialsStudio2020.tar file to your /home folder on the cluster you intend to use. Then, run the commands

Question.png
[name@server ~]$ export MS_LICENSE_SERVER=<port>@<server>

and

Question.png
[name@server ~]$ eb MaterialsStudio-2020.eb --sourcepath=$HOME

Once this command has completed, log out of the cluster and log back in. You should then be able to load the module with

Question.png
[name@server ~]$ module load materialsstudio/2020

In order to be able to access the license server from the compute nodes, you will need to contact technical support so that we can configure our firewall(s) to allow the software to connect to your licence server.


Installing Materials Studio 2018

Note

These instructions have been tested with Materials Studio 2018.


If you have access to Materials Studio 2018, you will need two things to proceed. First, you must have the archive file that contains the installer; this file should be named MaterialsStudio2018.tgz. Second, you must have the IP address (or DNS name) and the port of an already configured license server to which you will connect.

Once you have these, upload the MaterialsStudio2018.tgz file to your /home folder on the cluster you intend to use. Then, run the commands

Question.png
[name@server ~]$ export MS_LICENSE_SERVER=<port>@<server>

and

Question.png
[name@server ~]$ eb /cvmfs/soft.computecanada.ca/easybuild/easyconfigs/m/MaterialsStudio/MaterialsStudio-2018.eb --disable-enforce-checksums --sourcepath=$HOME

Once this command has completed, log out of the cluster and log back in. You should then be able to load the module with

Question.png
[name@server ~]$ module load materialsstudio/2018

In order to be able to access the license server from the compute nodes, you will need to contact technical support so that we can configure our firewall(s) to allow the software to connect to your licence server.

Team installation[edit]

If you are a PI holding the Materials Studio licence, you can install Materials Studio once for all your group members. Since normally team work is stored in the /project space, determine which project directory you want to use. Suppose it is ~/projects/A_DIRECTORY, then you will need to know these two values:

1. Determine the actual path of A_DIRECTORY as follows:

[name@server ~]$ PI_PROJECT_DIR=$(readlink -f ~/projects/A_DIRECTORY)
[name@server ~]$ echo $PI_PROJECT_DIR

2. Determine the group of A_DIRECTORY as follows:

[name@server ~]$ PI_GROUP=$(stat -c%G $PI_PROJECT_DIR)
[name@server ~]$ echo $PI_GROUP


With these values known, install Materials Studio.

  1. Change the default group to your team's def- group, e.g.,
    Question.png
    [name@server ~]$ newgrp $PI_GROUP
    
  2. Open the permissions of your project directory so your team can access it, e.g.,
    Question.png
    [name@server ~]$ chmod g+rsx $PI_PROJECT_DIR
    
  3. Create an install directory within /project, e.g.,
    Question.png
    [name@server ~]$ mkdir $PI_PROJECT_DIR/MatStudio2018
    
  4. Install the software, e.g.,
    Question.png
    [name@server ~]$ MS_LICENSE_SERVER=<port>@<server> eb MaterialsStudio-2018-dummy-dummy.eb --installpath=$PI_PROJECT_DIR/MatStudio2018 --sourcepath=$HOME
    

Before the software can be run:

  1. Run this command.
    Question.png
    [name@server ~]$ module use $PI_PROJECT_DIR/MatStudio2018/modules/2017/Core/
    
    • Your team members may wish to add this to their ~/.bashrc file.
  2. Load the materialsstudio module, i.e.,
    Question.png
    [name@server ~]$ module load materialsstudio
    


NOTE: Be sure to always replace variables PI_GROUP and PI_PROJECT_DIR with their appropriate values.

Examples of Slurm job submission scripts[edit]

The following examples assume that you have installed Materials Studio 2018 according to the above instructions.

File : file.txt

#!/bin/bash
#SBATCH --nodes=1
#SBATCH --ntasks-per-node=1
#SBATCH --cpus-per-task=32
#SBATCH --time=12:00:00

module load materialsstudio/2018

# Create a list of nodes to be used for the job
DSD_MachineList="machines.LINUX"
slurm_hl2hl.py --format HP-MPI > $DSD_MachineList
export DSD_MachineList

# Job to run
RunDMol3.sh -np $SLURM_CPUS_PER_TASK Brucite001f


Below is an example of a Slurm job script that relies on Materials Studio's RunCASTEP.sh command:

File : file.txt

#!/bin/bash
#SBATCH --nodes=1
#SBATCH --ntasks=1
#SBATCH --cpus-per-task=2
#SBATCH --mem-per-cpu=1M
#SBATCH --time=0-12:00

module load materialsstudio/2018

DSD_MachineList="mpd.hosts"
slurm_hl2hl.py --format MPIHOSTLIST >$DSD_MachineList
export DSD_MachineList

RunCASTEP.sh -np $SLURM_CPUS_PER_TASK castepjob

if [ -f castepjob_NMR.param ]; then
  cp castepjob.check castepjob_NMR.check
  RunCASTEP.sh -np $SLURM_CPUS_PER_TASK castepjob_NMR
fi


Installing earlier versions of Materials Studio[edit]

If you require an earlier version of Materials Studio than 2018, you will need to install in into an Apptainer container. This involves

  1. creating an Apptainer container with a compatible distribution of Linux installed in it;
  2. installing Materials Studio into that container;
  3. uploading the Apptainer container to your account and using it there.
    • NOTE: In order to be able to access the license server from the compute nodes, you will need to contact technical support so that we can configure our firewall(s) to allow the software to connect to your license server.

Please be aware that you might be restricted to whole-node (single-node) jobs as the version of MPI inside the container might not be able to be used across nodes.